Ablerex 800L User Manual
Also see for 1000L: Manual
1USER’S MANUAL800L/2200LThis manual contains important safety instructions. Please follow all instructions during installation. Read this manual thoroughly before unpacking,installing or operating.Caution: Risk of Electric Shock The UPS contains batteries. The output outlets may be electrically live even when the UPS is disconnected from the AC mains. The UPS contains potentially hazardous voltages. Do not open the units as there are no user serviceable parts. All maintenance and servicingshould be performed by qualified service personnel. Risk of electric shock, Battery Circuit is not isolated from AC input, hazardous voltage may exist between battery terminals and ground. Testbefore servicing and use insulated tools.NOTE: The UPS is designed to be for use with computer loads only.Caution:Do not connect a laser printer to the UPS.A laser printer draws significantly more power than other types of equipment and may overload the UPS.SETUP1 InspectionInspect the UPS upon receipt.Notify the carrier and dealer if thereis damage. The package isrecyclable; save it for reuse ordispose of it properly.Inspect accessories:① Power cable 1PCSUSER MANUAL 1PCS2 Choose an installation location- Avoid locations that are excessively humid, near water,near heat sources or in direct sunlight- Allow 1inch (2.5cm) clearance on each side of the UPS.3 Connecting Equipment and Power to the UPS4 Connect Modem/ Phone / Network for Surge Protection (Optional) 5 Connect Interface Device 6 Turn ON/OFF the UPSTurn on the UPS: Press the UPSOn/OFF Switch for approx. 3seconds, then the Buzzer soundstwice, the UPS will start-up.Turn off the UPS: Press the UPSOn/OFF Switch for approx. 3seconds, then the Buzzer soundstwice, the UPS will shutdown.7 Cold Start FunctionWhen the UPS is OFF and no utility inputpower is present, use the “Cold Start”feature to apply power to the loads fromUPS‘s battery. Press the “ON/OFF” switchuntil the UPS beeps.8 Software Download and InstallationPlease follow steps below to download and install monitoring software:1. Go to the website http://www.ablerex.com.sg/downloads.html2. Depending on the computer OS, select Emily software (for Win 7&8 OS, select Emily2) and click download.3. Follow the on-screen instructions to install the software.4. When the computer restarts, the monitoring software automatically search and connects to the UPS.FRONT PANEL EXPLANATIONS800L / 1000L–LED FRONTPANEL (STANDARD) Symbol LED Color Description/function 1500L/1800L/2200L – LEDFRONT PANEL (STANDARD) Symbol LED Color Description/functionN/A Turn-on/Turn-off SwitchN/A Turn-on/Turn-off SwitchGreen Lit: Line modeFlashing: Battery modeGreenLit: Line modeDim: Abnormal inputvoltage and frequencyRed Lit: System malfunctionor abnormalN/A LoadYellow Lit: Battery modeFlashing: Battery LowN/A BatteryGreen Load Percentage/Battery CapacityRed Lit: System malfunctionor abnormalREAR PANEL EXPLANATIONS800L/1000L REAR PANEL1. AC Input Outlet2. Fuse3. Output Connector:4x IEC Outlets or3x Universal Outlets or1x Schuko Outlet or4x Thailand Outlets4. USB (Standard) orRS232 (Optional)5. Modem/NetworkSurge protection(Optional)1500L/1800L/2200L REAR PANEL1. AC Input Outlet2. Fuse3. Output Connector:6x IEC Outlets oror 4x Universal Outletsor 2x Schuko Outletsor 6x Thailand Outlets4. USB (Standard) orRS232 (Optional)5. Modem/NetworkSurge Protection (Optional)6. FanStep1: Connect the UPS to theAC mains.Step2: Connect the equipmentto the UPS output outlets.Step3: Switch on the AC Mains,follow by the UPS then theequipment last.*Plug the UPS into the AC Mainsto charge for 8 hours beforeusing the UPS.- For modem/phone line protection,connect equipment to the RJ11port using RJ11 cable.- For surge protection, connectequipment to the RJ45 port usingEthernet/RJ45 cable.The UPS is equipped withtwo interface ports: a USBport (Standard) and a 9-pinRS232 port (Optional)allowing advancedcommunication networkbetween the UPS and acomputer (network).12 345 123456 |
Related manuals for Ablerex 1000L
manualsdatabase
Your AI-powered manual search engine