Abloy ML81APV Instructions Manual
  |
ML81APV, ML81APH INSTRUCTIONSAn ASSA ABLOY Group brandCHANGING THE MASTER-CODE1. Press for 4 seconds (green LED starts to blink)2. Enter Master-code (factory setting 1111) and press3. Enter new Master-code (4 - 12 numbers) and press4. Enter new Master-code again and pressShort melody and LED blinks several times when changed successfully.Note. The master-code of the lock must be changed before taking the lock into use due safety reasons.Note. Changing Master-code will delete User-code.ADDING USER-CODE1. Press for 4 seconds (green LED starts to blink)2. Enter Master-code and press3. Enter new User-code (4 - 12 numbers) and pressShort melody and LED blinks several times when changed successfully.Note. Opening with the Master-code will delete the User-code.CHANGING THE USER-CODE1. Press for 4 seconds (green LED starts to blink)2. Enter User-code and press3. Enter new User-code (4 - 12 numbers) and pressShort melody and LED blinks several times when changed successfully.OPENING WITH THE MASTER-CODE+ Master-code +OPENING WITH THE USER-CODEUser-code +OUT OF BATTERYThere will be battery warning alarms, 5 beeps, while openingand closing the lock. Do not use the lock before the batterieshave been replaced. Use 3x 1,5V AA alkaline batteries only.Batteries last for 2 years or 6000 cycles.When the lock makes battery warning alarm a standard DC 5Vcharger with Micro USB cable can be used to supply the power.MELODY OFFand pressedsimultaneously for 2 secondsMELODY ONand pressedsimultaneously for 2 secondsRESET (if there is unknown problem and lock does not work. Does not delete codes)Press and simultaneously (Short melody and green and red LED blinks)Note. The doormust be closedor the latchpressed down.Note. The doormust be closedor the latchpressed down.Note. The doormust be closedor the latchpressed down.USB-connector18.12.2017 Rev.0 |
Related manuals for Abloy ML81APH
manualsdatabase
Your AI-powered manual search engine