HB20001M1M1M1M HomePNA Ethernet AdapterHomePNA Ethernet AdapterHomePNA Ethernet AdapterHomePNA Ethernet AdapterINTRODUCTIONThe HB2000 is a HomeNet to Ethernet Bridge which connectsany Ethernet device to a high speed access device or to aHomeNet LAN for Internet and Intranet access. This Bridgebrings you the newest Ethernet compatible technology thatuses the telephone wiring as the network's physical wiringthereby eliminating the need to install new wiring. It isdesigned to operate on the telephone wire installed in homes.With this Bridge, every RJ-11 jack is Internet-Ready. Devices connected to this Bridge can share any highspeed Internet access line-V.90, ISDN, cable, xDSL or wire-less modem.This Bridge allows you to connect PCs and Ethernet enabled devices, such as Switch, HUB and printers, toa HomeNet LAN by simply plugging into the existing RJ-11 jacks. This Bridge's 1 Mbps throughputprovides the bandwidth necessary to support existing networking applications such as application sharing,peripheral sharing and file sharing.For providing a LAN networking solution, the Bridge acts as a high speed network access device for 1Mbps Internet service that shares the existing telephone wire with POTS (Plain Old Telephone Service)service. This allows multiple PCs to access the Internet concurrently. The Bridge also distributes bandwidthwithin a customer premises that use V.90, ISDN, Cable, wire-less and xDSL modems to deliver high-speedaccess to the outside of the customer premises.FEATURES Plug and Play Protocol independent Stores and forwards switching architecture Link two LAN segments into a single logical network High-speed internet and intranet access Standard 10BASE-T ethernet 1 Mbps home network Uses existing phone jacks LED indicators Flash memory for firmware upgrade FCC Class B & VCCI Class II certificationSPECIFICATIONSStandards IEEE802.3 10BASE-T Ethernet compliant HomePNA 1.1 specifications compliantData Rates Home Networking: 1 Mbps Ethernet: 10 MbpsDistances Home Networking: 150 meter maximumbetween the two farthest nodes on the LAN Ethernet: 100 meter maximum between twofarthest nodes on the LANPower consumption:5V DC IN, Less than 4WLEDs Power HomeNet Link/Activity Ethernet Link/Activity ErrorConnectors One RJ-11for connecting with HomePNAdevice One RJ-45 for connecting with a 10BASE-TnetworkCables Home Networking: standard home telephoneline Ethernet: CAT 3, CAT5 or better UTP