Abrelex GLAMOR Series User Manual
  | |
Contents | 
1GLAMOR UPS SeriesUSER’S MANUAL450VA/650VA/850VA/1000VA/1500VA/2000VAIMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONSThis manual contains important safety instructions. Please follow all instructions carefully duringinstallation. Read this manual thoroughly before attempting to unpack, install or operate.CAUTION- To prevent the risk of fire or electric shock, install in a temperature and humiditycontrolled indoor area, free of conductive contaminants.CAUTION- Risk of electric shock, do not remove the cover. No user serviceable parts. Referservicing to qualified service personnel.CAUTION- Risk of electric shock, hazardous live parts inside this UPS can be energized from thebattery supply even when the input AC power is disconnected.CAUTION- Risk of electric shock, Battery Circuit is not isolated from AC input, hazardous voltagemay exist between battery terminals and ground. Test before touching.NOTICE- The UPS is designed to be for use with computer loads only.SETUP1 InspectionInspect the UPS uponreceipt. Notify the carrierand dealer if there isdamage. The package isrecyclable; save it for reuseor dispose of it properly.Inspect accessories:① Power cable 1PCSUSER MANUAL 1PCS2 Choose an installation location 3 Connect the loadsPlug in the AC input cord to the Utility(Make sure thevoltage of Utility matches with the inputvoltage window of the UPS)※Plug the UPS into the wall outlet to charge the UPS forover 8 hours before using the UPS.Plug in the loads to output receptacles on the rear panelof the UPS.Caution：Do not connect a laser printer to the outlets.These UPS outlets provide battery power to theequipment when utility voltage is outside acceptable limits.4 Connect Modem/ Phone / Network for Surge Protection(only for themode with RJ-45)Connect a single modem/phone line intosurge-protected “IN” outlet on the backpanel of the UPS unit. Connect from“OUT” outlet to the computer withanother phone line cable.5 ConnectComputerInterfacePort(Optional)Connect the optional interfacecable to the USB interface porton the back of the UPS.Connect to the computer. Seesoftware document for installation instruction.6 Turn ON/OFF the UPSTurn on the UPS : Press the UPSOn/OFF Switch for approx. 3 seconds,then the Buzzer sounds twice, the UPSwill be start-up.Turn off the UPS : Press the UPSOn/OFF Switch for approx. 3 seconds,then the Buzzer sounds twice, the UPSwill be shutdown.7 Cold Start FunctionWhen the UPS is off and there is nopower utility, it's still possible to coldstart the UPS unit to power the loads.8 Software Download and InstallationPlease follow steps below to download and install monitoring software:1. Go to the website http://www.Ablerex.com2. Click EmilyII software icon and then choose your required OS to down load the software.3. Follow the on-screen instructions to install the software.4. When your computer restarts, the monitoring software ※Software only for the model with communication port.FRONT PANEL EXPLANATIONSGR- 450 / 650 / 850–LED FRONTPANEL(STANDARD)Symbol LEDColorDescription/function GR-450/650/850/1000/1500/2000 –LCD FRONT PANEL(OPTION))N/A Tack switch forTurn-on/Turn-offGreenLit: Line modeDim: Abnormal input voltageand frequencyFlashing: Standby modeYellow Lit: Battery modeFlashing: Battery LowRed Lit: System malfunction orabnormal1.Line mode 4. Battery capacity 7.Fault2.Battery mode 5. Load level 8.Tack switch forTurn-on/Turn-off3.AVR mode 6.MeasurementTarget & ValueGR-1000/1500/2000 – LED FRONTPANEL(STANDARD)Symbol LEDColorDescription/function REAR PANEL EXPLANATIONSN/A Tack switch forTurn-on/Turn-off1. AC input outlet2. Fuse3. Output receptacles4. RS-232 or USB port (option)5. Modem/LAN Internet Protection (option)6. Fan(only for GR 1000/1500/2000)Green Lit: Line modeFlashing: Battery modeRed Lit: System malfunction orabnormalN/A LoadN/A BatteryGreen Load Percentage/ BatteryCapacity192321982002003 |
Related manuals for Abrelex GLAMOR Series
manualsdatabase
Your AI-powered manual search engine