Abus Resettable 160 Series Instructions Manual

Abus Resettable 160 Series Instructions Manual Manual pdf 1 page image

160 Series Resettable• The combination is set at the factory to open at 0-0-0-0• To open, turn each wheel to 0 and depress the shackle• To lock, scramble the wheel and depress the shackleTO CHANGE THE COMBINATION1. Pull up shackle2. Turn setting screw clockwise until you hear and fell a click(about 120 degrees)3. Select your own combination4. Important, turn setting screw to original position (screw slot mustbe in line with shackle)180 Series Resettable• The combination is set at the factory to open at 0-0-0-0• To open turn each wheel to 0 and depress the shackle• To lock, scramble the wheel and depress the shackleTO CHANGE THE COMBINATION1. Open the padlock2. Insert the change tool key into the keyhole on the side of the lock3. Push the change key in as far as it will go and turn 90 degrees ineither direction. WARNING if the change key is not push in fully, thethe combination may be lostLeave the change key in the keyhole.4. Set the wheels to the new number. Make sure the numbers arealigned horizontally, other wise the combination may be lost5. Turn the change key back to its original position, then pull it out.The lock is now set to the new combination6. To Lock, turn one or more wheels and depress shackle170 Series Resettable• The combination is Set at the factory to open at 0-0-0-0• To open turn each wheel to 0 and depress the shackle• To lock, scramble the wheel and depress the shackleTO CHANGE THE COMBINATION1. Open lock2. Press change pin down into open shackle hole as far as it will goIf pin is not fully depressed, then a lost combination will result3. Leave pin in shackle hole4. Set the wheels to your own combination5. Pull out change pin. Lock is now set to your new combination6. To lock, turn one or more wheels and depress shackleResettableCombination PadlocksInstructions

/ 2

Related manuals for Abus Resettable 145 Series