Acacia Pharm Pump II Frequently Asked Questions Manual
  |
Pharm Pump IIFrequently Asked Questions1 My pump is pre-programmed. How do I selectthe pre-programmed option I need?2 How do I program the pump myself?Begin program selection by pressing #2 or #8. The options willappear in alphabetical order with volume amount displayed.Use the arrow keys to highlight your selection.To start, press the arrow with SETUP above it. This is your mainarrow throughout the programming.Press the TYPE function arrow key at this time to change to thefunction of your choice. For example: VOLUME, AMBUL, TRANS,USAGE-1, USAGE-2, CUSTOM and NAME SYRINGE.Enter volume, set up speed and press QUIT. You may enter otherpump functions as necessary when prompted or enter QUIT tosave your program.Select #2 or #8Arrow key with SETUP inthe digital display window3 How do I adjust the volume?4 What is CW and CCW?5 How do I change the speed?6 How do I prime the pump?To change the desired volume, press the SETUP keyand use the numeric key pad.Key in the volume and then press ENTER. Once youhave chosen the desired volume, press QUIT.CW turns the rotor clockwise. CCW turns the rotor counter-clockwise. To change the existing setting, press the SETUPkey and select either CW or CCW. Press NEXT and then QUIT.Press the SETUP key, then press NEXT. When you seeSPEED, enter the required RPM between 30 to 300 andpress ENTER. Press NEXT and then QUIT.Press the START function key. Note: This is NOT a set primingvolume. When you verify the tubing is primed, press the STOPfunction key, followed by the ABORT function key.Access the menuSelect rotor directionEnter required RPMPress the STARTfunction key |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine