© AcAdemiA Furniture industries, LLc, 2013w w w. A c a d e m i a F u r n i t u r e . c o mModel # SCTl-2436Single STudy CArrel – ASSeMbly inSTruCTionSIllustratIon #1HArdwAre liSTPart drawing description QtyA Bolt 4B nut 4c Washer 4d Wrench 1e upper Leg screws 8F Leg insert screws 6G Glide 4H 2" screws 13i 2 ½" screws 8liST oF pArTSPart drawing description QtyP1 36x24 table top 1P2 17x21 Partition 2P3 10x29 shelf 1P4 17x36 Back Piece 1P5 upper Leg 2P6 Leg insert 2P7 stretcher Bar 1aFE GGP5P6P6P1C BP7FBCaEP5To ASSeMble:We suggest that 2 people assemblethis Carrel. The assembly for this carrelis quick and extremely easy, thanks toour dowel pin method.1. identify and separate all the parts and hardware.2. Place the 36x24 table top [P1] upside down on a flatsurface. Attach the [P5] upper legs with the [P7] stretcher bar.First line up the holes of the upper leg with the 2 holesin the stretcher bar's bracket, as shown in illustration #1.insert the [A] bolt from the outside of the leg and place the [c] washer and[B] nut inside, once the bolt is through the leg. tighten the [B] nut. repeat onthe other side.3. Properly align the upper leg bracket in the center of the table's width. thereare locator marks for assembly ease. use 4 [e] screws to attach each upper legto the underside of the table top. See illustration #14. install the [P6] leg inserts into the [P5] upper legs, as shown in illustration#1. the holes in the legs are 1" apart. set at desired height and tightenusing 3 [F] screws per leg. screw the [G] glide on the bottom of the t-legs.