Acadia LIVING Installation Instructions Manual
  |
1. Open shutter panels and position the light block on the window sill. The front of the light blockshould be flush with the front of the left and right frames. Make sure magnets on panels will latchonto the magnet catches on the light block.Install the plugs into the frames’ pre-drilled plug holes tocomplete the look of your shutters.Shutter Installation InstructionsZ Frame Inside Mount 2 Sides Cafe ShuttersInstallation VideoScan the QR code withyour smartphone tofollow along with videoinstructions.CONGRATULATIONS on purchasing the finest shutters in the market.You can take pride that your purchase will enhance the function and beauty of your home.IMPORTANT: Do not mix panels or frames from other windows. Install one shutter at a time.Getting StartedRemove the shutter from the package. Do not discard any of the packaging material until theshutter operates to your satisfaction. Check the diagram below to make sure you have thenecessary parts.Version 37103-65200Step 3: Secure the Light BlockStep 4: Install the PlugsOnce aligned properly, secure the light block with the light block screws provided through eachpre-drilled hole.2.Light BlockStep 1: Assemble FrameGetting StartedStep 2: Attach the PanelsStep 3: Secure the Light BlockStep 4: Install the PlugsINSTALLATION OVERVIEWLight BlockZ FrameZ Frame Inside Mount 2 Sides Cafe ShutterShutterPanelHingePinsHingePinsTensionAdjuster++Customer ServicePhone: 855.667.6261Email: Blinds.comSupport@NormanUSA.comAdjust the Tension SystemIf over a period of time the louvers on your shutters should loosen or notfunction properly, a built-in tension system can be adjusted. Simply open thepanels fully and find the tension adjuster screw hole on the side of each panel.Use a screwdriver to gently turn the screw on each side of the panel to yourdesired resistance level. Repeat process for other panel(s) if necessary.Lifetime Limited WarrantyAll Acadia Living shutters have a lifetime limited warranty and will be free from defects in materials orworkmanship for as long as the original retail purchaser owns the shutters, provided that such productswere properly installed in residential dwelling; and such products were made or assembled exclusivelyfrom original materials and components. Any resale or other transfer of the product and/or materialsvoids this warranty.For a complete copy of this warranty, please contact customer service by phone or email.Maintain Your ShuttersUse a clean dry cloth, feather duster or vacuum with brush attachment to gently remove dust and debris.To ensure thorough cleaning, wipe the louvers in the open and closed positions.Do not immerse the product in water and do not use harsh chemicals to clean. This may causediscoloration and the wood to warp. Ultrasonic cleaning is not recommended. For best results onComposite Shutters, use a cotton cloth dampened with water. Polyester cloths tend to create static,which can attract dust.L Bracket (30mm)for T-post without top/bottomframe (if applicable)Hinge ScrewsScrews for L bracket(30mm) (if applicable)Hinge PinsFrame ScrewsHinge SpacersLight Block ScrewsScrews for L bracket(30mm) (if applicable)Plug63.5mm [2 1/2"]38mm [1 1/2"]18.5mm [3/4"]Hinge Screws for1" T-post with panelfolds include RTL(if applicable)11mm [7/16"] |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine