Acard AEC-7730A Quick Manual
Also see for AEC-7730A: Quick guide
  |
Chapter 4 Troubleshooting4.1 Basic TroubleshootingInspect the following items if your AEC-7730A cannot work properly afterinstallation.1. Inspect if all connectors of SCSI cable and power cord are firmlyconnected.2. Inspect if the SCSI adapter is correctly inserted into the PCI slot on themotherboard.3. Inspect if the SCSI adapter’s driver is successfully installed.4. Check the jumper setting, and be sure that the SCSI ID number doesnot conflict with one another.4.2 Advanced TroubleshootingHere we only take the advanced troubleshooting in Windows XP as anexample. First let’s check the SCSI adapter.1. Right click “My Computer”.2. Left click “Properties”.3. After entering “System Properties”, click “Hardware”, “DeviceManager”. Then, double click “SCSI and RAID controllers” to see ifyour SCSI adapter is installed well.Now check the SATA HDD connected to AEC-7730A.1. In “Device Manager”, click “Disk drives” to show your HDD.2. Right click the SATA HDD and left click “Properties”.3. Enter “General” to see if the device works normally and the target ID iscorrect.Quick GuideVersion 1.1Copyright © 2007 ACARD Technology Corp.Release: June 2007ACARD SCSI-SATA BridgeAEC-7730A- 3 - |
Related manuals for Acard AEC-7730A
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine