Acard AEC-7763AS Quick Manual
  |
Quick Guide of AEC-7763AS1. OverviewAEC-7763AS is a 1-to-1 CD/DVD copy controller using ACARD’s advanced chip controllingtechnology. It doesn't need linking with a PC nor extra learning. Simply through its LEDs and abutton on the panel, you can easily and quickly back up all kinds of data, audio and videoCD/DVDs. AEC-7763AS is quite suitable for beginners and office workers. In the modern worldwhere information is regarded as an important asset, it is really a cost-effective and all-purposeproduct.2. Specifications● Model: AEC-7763AS● Firmware version can be updated from time to time● Supports 4 kinds of LEDs: Work, Error, OK, Power (determined by the case)● Supports the device interface of IDE● A single button: start/stop (pressing for 2~3 seconds)● Includes model A with start/stop button and model B without button● Supports DAO (Disk At Once)/TAO (Track At Once)3. Operations3.1 Connect CN2 to CD/DVD-ROM and CN3 to the writer with an IDE cable.3.2 Connect the power cord to CN4 and the two devices.3.3 Refer to (1) of Figure 1 for connecting LED lines.3.4 Refer to (2) of Figure 1 for connecting DIP switch3.5 Refer to (3) of Figure 1 for connecting the start/stop button (model A only).3.6 Put back the case, screw it alongside and plug in.3.7 Use DIP switch to adjust the mode. You can use a pen to tip the switch up or down to adjustthe function mode. Refer to Figure 2 for setting the DIP switch.3.7.1 Mode 0: COPY3.7.2 Mode 1: TEST3.7.3 Mode 2: TEST & COPY3.7.4 Mode 3: VERIFY3.7.5 Mode 4: COMPARE3.7.6 Mode 5: ERASE3.7.7 Mode 6: UPDATE FIRMWARE3.7.8 Mode 7: Reserved3.8 Turn on the power. The system will indicate the firmware version by Busy, Error and OKLEDs. For example, version 2.18 is represented by two glittering of Busy LED, one of Errorand eight of OK. Pay attention to the glittering. You can define the color of LEDs anew.3.9 About the buzzer3.9.1 Error: sound length is 0.2 second and 3 beep sounds3.9.2 OK: sound length is 1 second and 1 beep sound3.9.3 Start: sound length is 0.1 second and 1 beep sound3.9.4 Stop: one long sound and 3 short ones. Press the start/stop button to produce a longsound, and relieve to produce a short sound.3.9.5 Auto detection without pressing the start/stop button: sound length is 1 second and 5beep sounds.Ver: 1.0 |
Related manuals for Acard AEC-7763AS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine