Customer Support: 1-800-377-4532Revised: June 15, 2012 9:04 AMIZIP TricruiserRear-end Assembly ReplacementRequired Tools:• 8mm box wrench• 10mm box wrench• 17mm box wrench• 5mm Allen wrench• Phillips-head screwdriver• Needle-nose pliers• Scissors or diagonal cuttersPreparation:Quick reference:1. Remove the basket and fenders.2. Remove the battery.3. Break the front-rear transfer chain master link and remove the chain.4. Open the controller compartment and disconnect the motor. Cut any cable ties holding the motor wire to theframe.5. Remove the seatpost, then flip the tricycle upside-down.Step 1a) Remove the basket fromthe rear of the trike, usingan 10mm box wrench anda Phillips-head screwdriver.b) Remove the fendersfrom the trike, using an8mm box wrench and aPhillips-head screwdriver.1 21 2 3 4