Accell UltraAV K072C-013B Setup Instructions
  |
READ ME FIRST – SETUP INSTRUCTIONSThank you for purchasing the Accell UltraAV HDMI DistributionAmplifier. This product is designed to provide an exceptionalperformance and value. Please review the manual beforeoperating and retain for future reference.- CAUTION -1. Ensure the unit has sufficientventilation. Do not coverventilation openings. Do not installin a confined space.2. Do not operate near sourceof heat. Do not stack on top,underneath or between other heatgenerating unit/s including otheramplifiers.3. Unplug power adapter if notused for an extended period.4. To prevent damage from powersurges, the unit should be pluggedinto a surge protector or surge pro-tected power source.5. Do not use near liquid or areasof heavy moisture.6. Clean unit with a clean and drycloth only.7. This unit cannot be serviced inthe field. Contact Accell if service isrequired.8. Do not open case, risk of shock -shock hazard.9. Do not modify power cord or usethe product if the power cord isdamaged.IntroductionThe UltraAV 4x4 HDMI Matrix and Distribution Amplifier accepts signalsfrom up to 4 HDMI enabled audio/video sources and distributes thesignal to up to 4 HDMI enabled displays. The matrix can be configured tosend any input to any HDMI displays, monitors, projectors or TV’s.Over-Current and Over-Voltage ProtectionThe circuit boards are equipped with both over-current and over-voltageprotection and will automatically power down if encountered. The circuitboards will restore automatically once the excessive current or voltagehas passed.Package Contents●HDMI Distribution Amplifier (Matrix) ● Power Adapter●Remote Control (with battery) ● Owner’s Manual●CD-ROM (for RS-232 control)Model Number:K072C-013BUltraAV® HDMI 4x4 Matrix andDistribution AmplifierSetupWith the matrix power switch in the OFF position, connect an HDMI HighSpeed cable from the HDMI Output of the most commonly used audio/video source to the HDMI Input 1 located on the rear of the matrix.Similarly, connect the remaining source devices to the HDMI Input Portson the matrix.Tips: Use the shortest length HDMI cables possible in each pointin the installation. Use only High Quality and High Speed HDMIcables.Next, connect an HDMI cable to the HDMI Output Port 1 on the rear ofthe matrix. Connect the other end to the HDMI Input Port of the displaydevice. Similarly, connect the remaining HDMI Output Ports from thematrix to the other displays.The matrix has internal memory that stores the systeminformation for faster switching. Please follow the steps in theorder listed: Turn ON the displays and ensure they are awake (not instandby mode). Check the displays INPUT setting to ensure the correctHDMI port is active.Turn on the source devices and ensure they are awake (not in standbymode). Connect the power adapter to the matrix. Plug the poweradapter into a surge protected AC power outlet. Turn the matrix powerswitch to the ON position.The matrix has a low power draw and is intended to be left on. Ifthe matrix is turned off, start up the system as noted above. If newhardware is added, please perform a RESET.To RESET the matrix, turn off the display and source devices. Power offthe matrix and unplug the power adapter from the rear of the matrix.Wait 20 minutes for the memory of the system configuration inside ofthe matrix to be deleted. Follow the setup instructions above to correctlyinitiate the setup.HDMI 4x4 Matrix and Distribution AmplifierModel: K072C-013BSpecifications● Independently access 4 HDMI Sources from 4 HDMI Displays● Supports HD resolutions up to 1080P and 3D● HDMI 1.4a, HDCP 1.2 compliant● Input video signal: 5v p-p, Input DDC signal: 5v p-p (TTL)● Data transfer speed of 6.75Gbps (2.25Gbps/channel)● Audio formats supported: DTS-HD 7.1, Dolby True-HD 7.1● Deep color up to 36-bit● RS232 Port for control● Maximum input cable length: Up to 20m (24AWG)● Maximum output cable length: Up to 20m (24AWG)● Shelf or surface mountable● 5V DC, UL Listed power adapter● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D277W x 28H x 156D mm● Operating temperature range: 5 to 131°F (-15 to 55°C)● Operating humidity range: 5% to 90% RH (no condensation)LED indicator lightsOn initial power on, all LED lights on the matrix should come on solidblue. All the numerical LED displays will momentarily read ‘0’ andthen change to ‘1’. If less than the maximum number of Displaysare connected to the matrix (not all the outputs are used) thenumerical indicator will indicate ‘0’ for that output and there will be nocorresponding HDMI OUT blue LED for the unused output. Blue lightswill only appear for devices connected. Any unused HDMI Input ports willalso have its HDMI IN blue LED unlit.OperationManual Control: You can operate HDMI source switching manually byusing the buttons labeled ‘Out” located on the front panel. Press thebutton that corresponds to the output that you want to change the HDMIsource on and toggle through until the desired HDMI input source videois being displayed. A numerical LED indicates which HDMI source input isbeing shown on each output (HDTV).Remote Control: Included with the Matrix is a Remote Control. Theremote control can control the matrix by pointing it at the front of thematrix, targeting the integrated IR receiver labeled IR. IR uses line-of-sight between the remote control (or IR-TX) and the receiver. The anglewhich the remote will work is at about a 15° degree angle in eitherdirection to the receiver. If the receiver is postioned such that thereis not line-of-sight, the port labeled “IR Extender” accepts an optionalIR Receiver. This receiver enables line-of-sight if the matrix is out ofposition.LED Indicator Lights |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine