Access One DL1000 Quick Reference
Also see for DL1000: Product manual
www.AccessOneTechnologies.comIMPORTANT U SER INSTRUCTIONS :Automatic gate systems provide user convenience and limit vehicular traffic. Because these systems canproduce high levels of force, it is important that you are aware of the potential hazards associated with thesystem. Potential hazards may include pinch points, entrapment positions, lack of proper pedestrianaccess, blind spots for traffic visibility.It is the joint responsibility of the designer, purchaser, installer and end user to verify the system is properlyconfigured for its intended use. Be sure that the installer has instructed you on the proper operation ofthe gate and gate system before use. Be sure the installer trains you about the basic functions of therequired reversing devices associated with the gate system and how to properly test them. Reversingdevices may include reverse loops, sensing edges, photoelectric cells, inherent reverse detection, and/orother external devices.R ESTRICTIONS & WARNINGS :1. A moving gate can cause serious injury or death. Read and follow all installation manuals, reference manuals, andwarning label instructions.2. Vehicular gates are for vehicles only. Pedestrians must use a separate entrance. Keep all pedestrian traffic away fromany vehicular gate. No one should cross the path of a moving gate.3. Never allow children to operate or play with gate controls or to play in the area of a gate system.4. Access control devices must be placed far enough from moving gates to prevent the user from coming in contact withthe gate while operating the controls.5. All activating devices must be installed in a clear line-of-sight with the gate and its travel.6. Activating devices must be installed a minimum of 10 feet away from the gate.7. Outdoor or easily accessible controls shall have a security feature to prevent unauthorized use.8. Be sure to mount all operating devices clearly out of reach of through gates.9. DO NOT install this device unless all potential hazards and pinch points have been eliminated.DO NOT allow children to play near, on or withthe gate, gate operator, or any of its controls.!DO NOT mount operating devices accessiblethrough the gate or in between gate and wall.!Read and follow all UL and Safety Standards before installing. Refer to the manual and qualified personnelfor assistance. DO NOT install this device unless all entrapment and pinch points are eliminated.Revision 1.6DL1000Stand Alone Digital LockQuick Reference Installation Instructions Wiring Instructions |
Related manuals for Access One DL1000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine