BG-D40C Battery GripFor NIKON D40 / D40X / D60BG-D40C Battery Grip Instruction for UsageThank you for purchasing the BG-D40C Battery Grip for use with Nikon D40 / D40X / D60 DigitalSLR Cameras. The BG-D40C Battery Grip uses one or two EN-EL9 Li-Ion Battery Packs, or six AANi-MH batteries. This battery grips enables extended shooting time, and is perfect for low-temperatureenvironments. This battery grip is equipped with a Vertical-Grip Shutter-Release Button, so thatshooting vertical can be done with the same functionality as shooting horizontal. Parts Name1. Battery Compartment Release Latch2. Battery Compartment3. Attach/Detach knob4. Attachment Screw5. Grip Battery Insert6. Grip Electrical Contacts7. Tripod Socket8. Vertical-Grip Switch9. Vertical-Grip Shutter Button10. Camera Battery Compartment Cover Storage Slot11. ON / OFF Control Switch12. Vertical Grip Shutter Part13. AA Battery Magazine14. EN-EL9 Battery Magazine Installing BatteryUsing the EN-EL9 Battery Packs1. Press down the Battery Compartment Release Latch and open the Battery Compartment Cover.Next, pull out EN-EL9 Battery Magazine or the AA Battery Magazine(Diagram A and DiagramB)2. Install two EN-EL9 battery packs as shown by the indicators on EN-EL9 battery magazine (Besure that the contacts of the EN-EL9 battery are upturned). Be sure that the contacts of theEN-EL9 battery are seen in the gap of the magazine so that they will make a connection on theinside of the battery grip. Insert the EN-EL9 Battery Magazine into the battery grip and closethe Battery Compartment Cover. Be sure that the Compartment Cover is locked well beforebeginning use.(Diagram C and Diagram D)Note: The battery grip can also be used with one EN-EL9 Battery Pack.z If only one EN-EL9 battery is used, It may be inserted in either the right or left sides.z If two battery packs are inserted, power is supplied simultaneously by both batterypacks.z Two battery packs with different charging levels can be inserted and used without anyproblems.Using AA batteries1. Insert six Ni-MH AA batteries into AA Battery Magazine with the [+][-] matching up on theinside of the Battery Magazine.(Diagram E)2. Install the AA Battery Magazine into the Battery Compartment, then close the batteryCompartment Cover and be sure that the battery cover is in the locked position(Diagram F)