Accu-Sort AXIOM Quick Reference Manual
  |
AXIOM™ Line Bar Code ReaderQuick Reference GuideAXIOM | Line Bar Code Readers | LaserIntroductionThe AXIOM is designed for easy installation and setup. Use this guide as a cross reference tolocate the content you need in the AXIOM/AXIOM-X Product Line Manual.Safety Precautions (Chapter 2)Observe all safety precautions regarding:• Power, electrical, grounding (p. 13)• Electrostatic discharge (ESD) (p. 14)• Laser Exposure (p. 15)Mechanical Installation (Chapter 3, see also mounting illustrations, side 2)1. Assemble mounting structure according to your mounting diagram, if applicable.2. Mount wiring base in the defined location using orientation considerationas a guideline (p. 19-21). A universal mounting bracket is available (p. 24-26).3. Mount the Trigger Photoeye and reflector (p. 30).4. Mount the tachometer, if applicable (p. 33).5. Install optional I/O modules into wiring base, if applicable (p. 34-35).Electrical Installation (Chapter 4, Appendix E)Use the wiring base label (see side 2) as a reference when performing electricalinstallation.1. Properly ground wiring base to protective earth (PE) ground (p. 46-47).2. Connect power supply to wiring baseand perform polarity check (p. 51-53).3. Connect Trigger photoeye to Triggerterminal blocks (p. 54).4. Connect tachometer to TACH terminalblocks and use ferrite clamps (p. 55-56).5. Connect RS232/422 communicationsto SERIAL COM terminals (p. 57).6. Connect Ethernet communicationsto ETHERNET terminals (p. 58).7. Connect I/O module wiring to I/O 1 through I/O 4, as required (p. 59-60).8. Install scan head to wiring base as outlined in Chapter 3 (p. 39-42).Setup and Operations (Chapter 5 and 6)1. Use the first-time startup / setup procedures and operations checklist (p. 118-119).2. Use AXCESS and a setup cable (p. 71) or network connection (p. 73) to modifyoperating parameters (p. 75-104).3. Monitor operations using AXIOM Monitor and Log Viewer diagnostics (p. 124).4. Backup parameters to the wiring base using AXCESS or the connector panel (p.104).An AXIOM typically includes:• AXIOM Scan Head• Wiring Base• Power SupplyOptions that may be included:• Universal Mounting Bracket• Trigger PhotoeyeTime Required: 45 minutes / unit• Mechanical installation (30 minutes)• Electrical installation (15 minutes)• Setup (see AXCESS Quick Reference Guide)Tools Required:• Phillips Long-Handled #2 Screwdriver• Slotted screwdriver (1/8”)• Adjustable Wrench (open-ended)• Tape MeasureQuick Start References:• AXIOM/AXIOM-X Product Line Manual• Mounting structure drawingsOther Useful References:• AXCESS for AXIOM Quick Reference Guide• Interconnect drawings located inAXIOM/AXIOM-X Manual, App. E (p.209):107480 - Controller/Client with Tach107481 - Controller/Client/Client w/Tach107482 - Start/End Trigger Photoeyes107483 - Stack Light with Internal RelaysNOTICE: Application-specific documenta-tion provided with your equipment maysupersede the information provided here.Installing Scan Head to Wiring BaseObserve Laser Safety Warnings on AXIOM |
Related manuals for Accu-Sort AXIOM
manualsdatabase
Your AI-powered manual search engine