Accu-Sort RFR-02 Test Procedure
Also see for RFR-02: Installation guide
                      |
Accu-Sort ® Systems, inc.511 School House RoadTelford, PA 18969 U.S.A.1-800-BAR-CODE1-(215)-723-0981This copy expires 7 days after: 8/25/06unless stamped "CONTROLLEDCOPY" in redIssued: 07/06/05Revised:TP-ENM-704Rev. APage 1 of 22Annotations to this document are acceptable only if done in RED pen and initialed by arepresentative of the department responsible for the creation and maintenance of the documentRFR-02 READER TEST PROCEDURE______________________________________________________________________________THIS IS A CONTROLLED COPY ONLY IF STAMPED “CONTROLLED COPY” IN RED.©Accu-Sort Systems, inc.Note: You shall refer to ERP to determine the Rev. of assembly.1.0 PURPOSEThis document provides instructions for testing assembly #1000052365 (12 VDC Power) and1000053245 (10-30 VDC Power)2.0 SCOPEThis document applies to any of the above items that have the potential of being shipped to acustomer in order to fulfill a sample request or a normal sale. It shall be used by ASI productionwhen being assembled, set-up or tested at ASI. At the discretion of the appropriate ASI personnel, itcan also be used by outside vendors.3.0 RESPONSIBILITYPrimary: ProductionSupport: Manufacturing Engineering4.0 REFERENCESGU-ERP-019 Guide to Quality Module Data EntrySF-QAF-006 Parts Return Reject Repair TagSP-QAF-005 Control of Nonconforming ProductWI-QAF-015 In-Process Inspection1000052365 RFR-02 (12VDC Powered) Assembly BOM1000053245 RFR-02 (10-30VDC Powered) assembly BOM5.0 DEFINITIONS6.0 REQUIREMENTSTools RequiredRFID Spectrum AnalyzerUniversal Counter3/16” Nut DriverVariable Power SupplyPhilips ScrewdriverFlat ScrewdriverRFA-02 ASI Antenna 5” x 7”Test Leads (“Jumper Cables”) |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine