AcuDC 240 Series Power MeterUser's Manualwww. .com information@itm.com1.800.561.8187

Meter Overview

Areas of Application

Chapter 2 Installation

Installation Methods

Wiring

Display Panel and Keys

Metering Data

System Parameter Settings

I/O Parameter Settings

Meter Information Display

Chapter 4 Communications

Communication Format

Communication Address Table

Appendix

Appendix B Ordering Information

AccuEnergy AcuDC 240 Series User Manual

AcuDC 240 Series

CHAPTER 1: Introduction to the AcuDC

Compliance

Features & Specifications

CHAPTER 2: Installation - Physical Setup

Tools for Mounting

Mounting I/O Modules Onto Meter

Wiring Control Power

Current Input Wiring

Voltage Input Wiring

Current & Voltage Wiring at the Same Time

Communications Wiring

Removing meter for servicing or maintenance

CHAPTER 3: Installation - Configuration Parameter Set-up via display

General Parameter Setup

Key's Function in parameters setup

Configure AcuDC to work with Current Hall Effect Sensor

3.2.4 Configure AcuDC to work with Current and Voltage Hall Effect Sensor

Clear Energy, Ah and DI Counter

Set Backlight Brightness

Password Setting

I/O Parameter Setup

RO parameter setting

CHAPTER 4: Viewing Metering Parameters – VIA Display

View the Meter and Load Running Time

View the serial number from the meter

Connection Setup

CHAPTER 5: Viewing Real-time Readings Via AcuView Software

Configuration Parameters Setup

Configure the Data Log using the meter's onboard memory

5.2.3 Configure the data log to log the readings on the computer's memory

Viewing Metering Parameters

Reading Data Log on Meter's Onboard Memory

Reading Data Log on the computer's memory

APPENDIX

B. Modbus Register Map

B.2 Communication Format

B.3 AcuDC240 Communication Address Table

C. Ordering Information

D. Glossary of Definitions

AcuDC 241

AcuDC 242

AcuDC 243


Contents Table Of Contents Meter Overview Areas of Application Chapter 2 Installation Installation Methods Wiring Display Panel and Keys Metering Data System Parameter Settings I/O Parameter Settings Meter Information Display Chapter 4 Communications Communication Format Communication Address Table Appendix Appendix B Ordering Information	AcuDC 240 Series Power MeterUser's Manualwww. .com information@itm.com1.800.561.8187 Next / 59