AccuQuilt Studio 209611 Operating Instructions Manual
  | |
Contents | 
call 888.258.7913 or 402.934.1110 order today @ accuquilt.com©2014 AccuQuiltRoller die cutting can’t get any easier. The time-saving AccuQuiltStudio™ is specially designed for quilt shops, fabric craft retailersand experienced and prolifi c home quilters. It quickly and easilycuts up to 10 layers* of fabric shapes for quilting, appliqué,fabric-covered objects, strips and novelty projects. The onlycutter on the market, it also accommodates AccuQuilt giantand super giant dies. The steel roller never needs replacing andwithstands years of die cutting use. That’s the kind of qualityand long-lasting durability you can depend on cut after cut,project after project. If you have further questions, please don’thesitate to call AccuQuilt Customer Service at 888.258.7913 or402.934.1110. And don’t forget to visit us online at accuquilt.com!cutter includes:• die tray • die pick• 3⁄32" hex wrench• 5⁄32" hex wrench• instruction label• user’s manual• one sheet giant cuttingplastic (60005)cutter specifications:• Dimensions: 243⁄4"W x 301⁄4"L x 83⁄4"H(63 cm x 77 cm x 22 cm)• Cutter weight: 34 lbs. (15.4 kg)• Boxed weight: 52 lbs. (23.6 kg)* Number of layers of fabric varies by fabrictype and thickness.Dies cut into reuseable sheets of cuttingplastic that provide hundreds of uses.Find all available cutting plastic sizes ataccuquilt.comsystem maintenanceThe only maintenance required for the Studio™ cutter isoccasional replacement of the die tray and cutting plastic.• Always use an AccuQuilt Studio™ die tray when cuttingwith the Studio cutter.• Depending on usage, the die tray must be replacedregularly. Average use requires replacement annually;heavier use will require more frequent replacement.• You will know the tray needs to be replaced when itwarps in the middle, when you hear a popping soundwhile cutting, or when you are not able to cut as manylayers as usual.• Replace cutting plastic when you are not able to cut aseffi ciently as usual.NOTE: No lubrication is necessary; all bearings are sealed.• Hand-operated fabric die cutter uses steel-ruledies to quickly and accurately cut shapes forquilting and fabric crafts.• Hundreds of shapes to choose from: classicdesigns, circles, hexagons, fl owers, strips, ragquilt shapes, quilt block sets and many more.• Cut all types of fabrics: cotton, batiks, fl annel,fl eece, wool, denim and even leather!• Dies never need sharpening, and the AccuQuiltStudio™ fabric cutter has a three year warranty.• GO!® Adapters for Studio™ allow you to takeadvantage of the entire AccuQuilt die collection,more than 500 piecing and appliqué shapes!easy as 1-2-3 to useLay die fl at inside tray with FOAMSIDE UP. Place fabric on top of die. Ifdesired, fan fold fabric to cut multiplelayers. Check orientation of fabricfor cutting non-symmetrical shapes.Place cutting plastic on top of fabric.1Push die, tray and plastic untilthey contact roller. Turn handle inthe direction you want die to go.If needed, continue pushing untilroller grabs die. Roll die and traythrough cutter.2Remove cutting plastic and fabric.Occasionally, threads may need to besnipped where cutting blades meeton the die. Repeat process fromopposite direction.3The Studio™ fabric cutter system consists of three major components: a roller die cutter, steel-rule dies and cutting mat.The Studio system will cut almost any fabric—up to ten layers. Follow these instructions for cutting letters and shapes:cut precise shapes without scissors or rotary cuttersquilt shopUse the AccuQuilt Studio™ cutter to increasesales and profi ts. Make it simple for yourcustomers to buy what they need by offeringpre-cut quilt kits in a variety of themes. |
Related manuals for AccuQuilt Studio 209611
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine