AccuScreens ELECTRIC SCREEN Operating Instructions Manual
Also see for ELECTRIC SCREEN: Operating instructions
        |
1OPERATING INSTRUCTIONS FOR ELECTRIC SCREENAUTOMATIC/ELECTRIC WALL/CEILING PROJECTION SCREENS—110-120V ACWALL MOUNTINGSuggested Methods of InstallationPictureSurfacePictureSurfacePictureSurfaceCONCEALEDEXTENSION BRACKETPictureSurfaceCEILING MOUNTINGInstallationThe AccuScreen Electric Screen can be mounted on a wall orsuspended from the ceiling using the universal mounting bracketsmolded into the case endcaps, or extension brackets. It must bemounted level and with the fl at back parallel to the wall.The screen (or extension brackets) should be mounted into studs orblocking in the wall/ceiling, or in drywall (minimum thickness ½") withspecifi ed anchors. For any other type of installation, follow all localbuild ing and safety codes.Steel studs, concrete or cinder block walls and all other types ofnon-wood frame construction require the use of special screws oranchors.The selection of appro pri ate mounting hardware should be made by a qualified professional installer.Caution: If using "S" Hooks or other open hooks for mounting, make sure to crimp the hooksclosed to prevent the screen from coming loose.6"(15mm)Wall Bracket11"/14"(28mm/36mm)Wall BracketUse the upper portion of the holes at theback of the endcap/mounting bracketfor fl ush wall mounting. Recommendedhard ware (not included): For mountinginto wood or wall stud, use #10 x 1¼"(M5 x 32mm) wood screws; for mountinginto dry wall (minimum ½" (12.7mm)thick), use 3/ 16 " (5mm) toggle bolts ormolly bolts. DO NOT USE FLAT HEADSCREWS. DO NOT OVERTIGHTEN.Po si tion and prop erly an chor screweyes or oth er fasteners (not included)into ceiling joists or other solid sur face.Sus pend “S” hooks (not included) fromfas ten ers (not included) and hook throughholes in the front of the mounting bracket.For added safe ty, crimp both ends of the“S” hooks so the screen cannot come off.Recommended hardware (not included): For mountinginto wood or ceiling joist, use two 3 /16 " x 1 1 /4 " (5mmx 32mm) screw eyes and 3/ 16 " (5mm) diam e ter“S” hooks; for mount ing into drywall (mini mum 1 / 2 "(12.7mm) thick), use 3 /16" (5mm) toggle or molly boltswith 3/ 16" (5mm) “S” hooks.Allow room for access, andmake sure enough room isallowed to completely hide thescreen case. Use the sameprocedures for ceiling or wallmounting.Optionally available—purchased separately. Seeinstruction steps includedwith brackets. |
Related manuals for AccuScreens ELECTRIC SCREEN
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine