www.aceinnovation.co.uk08455 199181SuperVisor®Assembly & User InstructionsThank you for purchasing an Ace Innovation SuperVisor®PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING ASSEMBLYAssemblyAssembly Step 1 – Use the diagram below to help1. Attach the supplied G-Clamp to a suitable stable surface and secure it tightly usingthe integrated bolt. *WARNING* DO NOT attach the G-Clamp if you feel that it maycause any damage to the surface you are mounting it on. If the G-Clamp is notsuitable you will need to contact your supplier and order the SuperVisor® weightedbase.2. *WARNING* Care should be taken when unpacking the SuperVisor® Arm as it isspring operated and unbalanced until the Visor element is installed [See Fig 2].3. Once the G-Clamp or weighted base is secure, loosen off the lock nut [See Fig 1]and lower the end of the SuperVisor® Arm into the top hole of the clamp or base.Once the Arm is fully inserted, tighten the lock nut to secure it.Fig 1