ACER GroupSpringwood Industrial, Inc. Klim Industrial, Inc.1062 N. Kraemer Place 244 N. Randolphville RoadAnaheim, CA 92806 Piscataway, NJ 08854Tel: 714-632-9701 Fax: 714-632-9730 Tel: 732-752-9100 Fax: 732-752-9101http://www.acergroup.com http://www.acergroup.cominfo@acergroup.com acer_klim@yahoo.comPROCEDURE TO SETUP AGS 2040AHD SURFACE GRINDER1. Unwrap the machine and check out machine for any physical damage. If so,report to your dealer as soon as possible. Touch-up paint is inside the toolbox.Use it as needed.2. Turn vertical handwheel counterclockwise (spindle up) to take out spindle supportblock. Swing out control panel out when removing spindle support block.3. Move machine to appropriate location. Put leveling screw, nut and pad onmachine (follow picture)Spindle supportblockControlsupportLeveling screw,nut and pad