Acer Altos EasyStore Quick Installation Manual

Also see for Altos EasyStore: User manual

Contents

Acer Altos EasyStore Quick Installation Manual Manual pdf 1 page image

Altos easyStore Quick Installation Guide1.1 Packing content:One Altos easyStore with pre-installed Hard Disk DrivesOne Power cordOne Software Installation CDOne DiskSafe Express Recovery CDOne RJ-45 Networking cable1.2 Default SettingName Default SettingUser name adminPassword storageIP Address 192.168.0.101Subnet Mask 255.255.255.0DHCP Client Yes1.3 Hardware InstallationIn order to connect Altos easyStore, perform the following steps:1. Carefully remove the Altos easyStore unit the package.2. Connect an Ethernet cable from your computer directly to the back of the Altos easyStore in Figure1-2.3. Connect your host computer and Altos easyStore by RJ45 Networking cable in Figure 1-2.4. Power on the Altos easyStore in Figure 1-1.Figure 1-1: Front PanelFigure 1-2: Rear PanelAltos easyStore Quick Installation Guide