Acer Android All-in-One Quick Start Manual
       |
EnglishAcer Android All-in-One Quick Start GuideImportant safety instructionsPlease read the following instructions carefully.1. To clean the Android All-in-One screen:• Turn off the Android All-in-One and unplug the power cord.• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.2. Do not place the Android All-in-One near a window. Exposing the Android All-in-One to rain, moisture or sunlight canseverely damage it.3. Do not apply pressure to the screen. Excessive pressure may cause permanent damage to the display.4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicingof any nature.5. Store the Android All-in-One in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the Android All-in-One outside this range may result in permanent damage.6. Immediately unplug your Android All-in-One and call an authorized technician if any of the following circumstancesoccur:• Android All-in-One-to-PC signal cable is frayed or damaged.• Liquid spills onto the Android All-in-One or the Android All-in-One is exposed to rain.• The Android All-in-One or case is damaged.Package contentsPlease refer to the User Guide for information about setting up your Android All-in-One.Turning on for the first timeYou will asked some questions before you can use your monitor as a Android All-in-One. To set up or access a Googleaccount, connect your Android All-in-One to an Ethernet or Wi-Fi access point.Connecting your monitor to a computer1. Turn off your computer and unplug your computer's powercord.2. Connect the signal cable to the DP (optional) and/or HDMI(optional) input socket of the monitor, and the DP and/or HDMI(optional) output socket of the graphics card on the computer.Then tighten the thumbscrews on the signal cable connector.3.4.Insert Android All-in-One power cable into the power port atthe back of the Android All-in-One.Plug the power cords of your computer and yourAndroid All-in-One into a nearby electrical outlet.Manufacture: Chicony Electronics Co., LTD.Model: A11-120P1A&A10-090P3AManufacture:Model: ADP-90MD BBAndroid All-in-One Power cord HDMI cable(optional)USB cable(optional) AC Adapter Quick startguideDP cable(optional)DELTA ELECTRONICS, INC.User guideHDMIDP USBUSBUSB3.0 portHDMI DP |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine