Acer ED242QRA Quick Start Manual
  |
EnglishLCD Monitor Quick Setup GuideAcer LCD Monitor Quick Start Guide (QSG)Important safety instructionsPlease read the following instructions carefully.Package contentsLCD monitor Power cord VGA cable(Optional)HDMI cable(Optional)Quick startguideAttaching the monitor to the base1. Remove the monitor base from the packaging and place it on a stable and level workspace.2. Take out the support, align the rear cover of the display, insert the back cover to ensure that the display and the supportconnection is stable, do not shake.3. The base is aligned with the support and inserted in the support, the rotating hand twist screw, until the tightening, fixed base.Connecting Your Monitor to a Computer1. Turn off your monitor and unplug your computer’s power cord.2. 2-1 Connect the video cablea. Make sure both the monitor and computer are switched off.b. Connect the VGA video cable to the computer.(Option,Only D-sub input model)3. Insert the monitor power cable into the power port at the back of the monitor.4. Plug the power cords of your computer and your monitor into a nearbyelectrical outlet.Adapter1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your location.• Turn off the LCD monitor and unplug the power cord.• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the LCD monitor outside this range may resultin permanent damage.6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:• Monitor-to-PC signal cable is frayed or damaged.• Liquid spills onto the LCD monitor or the monitor is exposed to rain.• The LCD monitor or case is damaged.• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.• PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.• Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.2-2 Connect HDMI Cable (Option，Only HDMI-input model)a. Make sure both the monitor and computer are powered-OFF.b. Connect the HDMI cable to the computer.External controlsFunction key a. Monitor power off status Press to switch power on. In the normal display,anytime to Press more than 5 seconds switch to turn off the power.b. Blue indicates power on. Blue flicker indicates standby/power savingmode. No light display indicates Power off.c. Press to any directions switch key to display First Menu. Press again to enternext function in the First Menu.d. The single toggle button on the backside of the Display bezel operates likea joystick. To move the cursor, simply toggle the button in four directions.Press the button to select desires option. In Main Menu The Green indicatesoperable, Grey indicates inoperable.AdapterVGAHDMI |
Related manuals for Acer ED242QRA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine