Acer LCD monitor Quick Start Manual

Acer LCD monitor Quick Start Guide (QSG)Important Safety InstructionsPlease read the following instructions carefully. This manual should be retained for future use.1. To clean LCD Monitor screen;-- Power off LCD Monitor and unplug the AC Cord.-- Spray a non-solvent cleaning solution onto a rag and clean the screen gently.2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water,moisture or sunlight can severely damage it.3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should beperformed by an authorized technician.5. Operate LCD Monitor in a room with a room temperature of 5° ~ 40°C (or 41° ~ 104°F).Operating the LCD Monitor outside this range could result in permanent damage.6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.* Monitor to PC signal cable is frayed or damaged.* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.* LCD Monitor or the case is damaged.1 Auto Auto configuration2 < Minus3 > Plus4 Menu OSD Manual5 PowerIf OSD is active, press to exit. If OSD is inactive, press and themonitor will automatically optimize the display position, clock andphase of your display.If OSD is active, press to select or adjust OSD options.If OSD is active, press to select or adjust OSD options. If OSD isinactive, press once, then press the buttons marked to adjustthe volume. (this function is optional only for models with speakers)Press to view OSD. Press again to exit.Power on/offGreen: power onOrange: in sleep modePackage contentsLCD Monitor Power Cord Audio Cable User Manual Quick Start Guide VGA CableAssembly Your Monitor with Monitor Base· Take out the monitor base from monitor box and placeon a stable and level workspace· Take out your monitor and assembly with the base.Make sure you heard click soundConnecting Your Monitor to a Computer· Turn off your computer and unplug your computer'spower cable.· Connect the VGA cable's blue connectors to themonitor's signal connector and blue video connector onthe back of your computer. Tighten the connectorscrews.· Optional: Connect the audio cable to the green audiojack on the back of monitor (only for the model withspeakers)· Insert the monitor power cable into the power port onthe back of the monitor.· Plug the power cables of your computer and yourmonitor into a nearby electrical outlet.· Turn on your computer and monitor.Operating Your MonitorEnglish(CD)

/ 1

Related manuals