EnglishAcer LCD Monitor Quick Start Guide (QSG)Important safety instructionsPlease read the following instructions carefully.1 To clean the LCD monitor screen:Turn off the LCD monitor and unplug the power cord.•Spray a non-solvent cleaning solution onto a rag and clean the screen gently.•2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing ofany nature.5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside thisrange may result in permanent damage.6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:Monitor-to-PC signal cable is frayed or damaged.•Liquid spills onto the LCD monitor or the monitor is exposed to rain.•The LCD monitor or case is damaged.•Package contentsLCD monitor AC Power cable DVI cable(Optional) VGA cable HDMI cable(Optional) AC Adapter User guide Quick startguideAttaching the monitor to the base1 Remove the monitor base from the packaging and place it on a stable and level workspace.2 Remove the monitor from the packaging.3 Attach the monitor stand arm to the base.Ensure that the base is locked onto the monitor stand arm. (for selected models)•Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin. (for•selected models)Connecting your monitor to a computer1 Turn off your computer and unplug your computer’s power cord.2 Connect the signal cable to the VGA and/or DVI-D (optional) and/orHDMI (optional) input socket of the monitor, and the VGA and/or DVI-D(optional) and/or HDMI (optional) output socket of the graphics cardon the computer. Then tighten the thumbscrews on the signal cableconnector.3 Connect one end of the adapter to the monitor and the other end to aproperly grounded, AC outlet.4 Plug the power cords of your computer and your monitor into a nearbyelectrical outlet.Panel controlsNo. Item Description1 Power button /indicatorTurns the monitor on/off. Blue indicates poweron. Blinking blue indicates standby / powersaving mode.2 < / > button Press the < / > button to navigate to the desiredfunction or to change the settings of the currentfunction.3 Menu / EnterbuttonPress to view the OSD menu. Press it again toenter a selection in the OSD menu.4 Auto / ExitbuttonWhen the OSD menu is active, press this•button to exit the OSD menu.When the OSD menu is inactive, press•this button to activate the Auto Adjustmentfunction.5 EmpoweringKeyPress this button to open the Acer eColorManagement OSD and access the scenario modes.DC-IND-SUB12345