Acme Packet Net-Net 2610 Quick Installation
  |
Net-Net OS-E and 2610/2620installation references• USB Creation andCommissioning Instructions• Release Notes• System Installation andCommissioning Guide• Slide Rail Kit InstallationNet-Net® 2610/2620 Quick InstallationWhat’s inside the box?• Net-Net 2610 or 2620• Power, console cables andrelated hardware, rack mountingkitsLaptop PCRJ-45 adapterRJ-45RS-232D Serial B portDB-9 serial cableConnect PC or terminal to serial port (ttyS1),or go to step 4b.Console settings:115200 bps8 data bitsNo parity1 stop bitNo flow controlConsole settings:115200 bps8 data bitsNo parity1 stop bitNo flow control4a Connect VGA console and keyboard forlocal management.KeyboardConsoleKeyboard and console portsEthernet port mapping -- Left to right, top to bottom1 = eth0 5 = eth42 = eth1 6 = eth53 = eth2 7 = eth64 = eth3 8 = eth71 2Ethernet port mapping -- Left to right, top to bottom1 = eth0 5 = eth42 = eth1 6 = eth53 = eth2 7 = eth64 = eth3 8 = eth74b Install network cables for connectivity tocommunications servers and the external network.Remote system management over Telnet, SSH,and Web.eth0eth1EthernetswitchesTelnet/CLI sessionInternetWeb management session5OR1 Carefully remove the Net-Net 2000Series from the shipping container,along with the accessories box.Install the chassis in a compatible rack.a. Select the appropriate installation kitfor the type of rack you are using; selecteither the slide rail kit or the fixed mountkit.b. Refer to the instructions included witheach kit for installation details.c. Install multiple systems in the rackfrom the bottom up.d. Install the front bezel aftercompleting Step 6.2 Connect the AC power cords.AC power cordPower receptacle (North America)or compatible power sourceInsert plug end into ACcable receptacle.3Proprietary & Confidential |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine