1OSD Control for RM6380Control Key DefinitionQuick Selecting Menu1.「> 」:Press this key can quickly go to signal input selection menu, (if the monitor has morethan one input source), there are “Auto/VGA/DVI” three modes.Press > , < to choose, press Menu to confirm the selection.3.「Auto/Exit」: Press this key can adjust the display to the best position and resolution.OSD Menu OperationPress「MENU」and the screen will appear the following OSD icons:1. Power LED Indicator: Green Light is with the input signal receivedRed Light is no signal input or in searching input.2. 「On/Off」: Press the button to turn on/off the display.3. 「Menu/Select」: 1. Call the Menu 2. Confirm the selection.4. 「 > 」: 1. Increasing 2. Move to left. 3. Quick input source selection5. 「 < 」: 2. Decreasing 2. Move to right.6. 「Auto/Exit」: 1. Exit the menu 2. Jump out the menu / sub