ACOM 2100 Transformer InstallationC A U T I O NAfter installing the transformer, the weight of the unit is about30kg, which should preferably be handled by two persons. Anassistant may be needed to hold the amplifier steady duringtransformer installation.Position the amplifier, with the transformer not yet installed, flat on a table nearthe place where it will be used. During the process described below, when theamplifier cover is removed, take care not to torque or twist the chassis nor letthe amplifier stand on edge. Do not lift the unit by only one corner.Remove the cover by removing all nine M3x6 screws.Orient the amplifier on the table so that the transformer compartment is in frontof you.Unplug all five connectors from the Mains board and remove two M3x8 screwsand one M3x6 screw.

Acom 2100 Installation Manual