Acorn ORION MINI-REP Nstallation, Operation & Maintenance Manual
ORION MINI-REP V2Conventional Repeater PanelINSTALLATION, OPERATION & MAINTENANCE MANUALGENERAL DESCRIPTIONThe ORION MINI-REP V2 will provide remote control and system display status from multiple locations, to an ORION basedConventional Fire Alarm System. Its reduced dimensions make it ideal for installation in reception areas or security boothswhere it would be impractical and unattractive to install a full size control panel. ORION MINI-REP V2 can be connected tothe ORION Conventional Panel using 4 different interconnecting technologies: RS232, RS485, (Fiber Optics and TCP/IPoptions are under development).The unit is provided as standard with an RS232 interface. Power for the ORION MINI-REP V2 can be supplied from thecontrol panel’s auxiliary power output or from an external 24 Volt DC power supply if required.IMPORTANT SAFETY NOTES● This equipment must only be installed and maintained by a suitably qualified and technically competent person.● A basic knowledge and training in the installation of Fire Detection Systems is assumed.● The Fire Detection System should be designed by a suitably qualified person with reference to the Local Regulations andGuidance from the fire Officer where applicable.● All wiring should be carried out with no power present in any part of the Fire Detection System.COMPATIBILITY NOTEORION-MINI REP V2 repeater panel is only compatible with ORION panels that exhibit the following sequential LED patternduring RESET.1www.acornfiresecurity.comwww.acornfiresecurity.com |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine