Connect the AC adaptorConnect the single plug into the “DC IN” jack on the unit’s back panel. Then, connect the AC Adaptor into the 120V AC outlet.PrPbYCOMPONENTVIDEO OUTVIDEO OUT AUX INDC IN 10VPrPbYCOMPONENTVIDEO OUTVIDEO OUT AUX INDC IN 10VFM ANT.2ARS35iQuickStartGuideCongratulations on purchasing your new docking station.Please follow these instructions to set up and start using the unit.www.acoustic-research.comConnect iPad/iPhone/iPodTo rotate your iPad/iPhone/iPod, press the ROTATE Button on the main unit or the ROTATE Button on remote control.When connecting an iPad/iPhone/iPod to this iPod Dock, please ensure that the correct adaptor plate is used. FAILURE TO DO SO MAY RESULT INDAMAGE TO THE iPad/iPhone/iPod.3The first time you dock your iPad/iPhone/iPod, you’ll be prompted to download the Acoustic Research Dock Plus App from the iTunes store.You are encouraged to download and install this app (right on your iPad/iPhone/iPod) in order to enjoy the wide variety of features which areavailable with the Acoustic Research Dock Plus App.• App is for iPad/iPhone/iPod touch only (iOS 3.0 or higher).• Note the Acoustic Research Dock Plus App must be running and visible while your iPad/iPhone/iPod is docked in order for manyof the additional features such as alarms and FM radio to properly operate. Launch the app by touching the app icon on youriPad/iPhone/iPod either just before or just after docking.MOTORIZED DRIVEiPhone 45G nano4GnanoiPod touchiPhoneiPadS O U N DR O TAT EV ID E O O U TUnpack the unitYou should find the following items in the box:1Main unitRemote controlMains adaptorSix iPad/iPhone/iPod adaptorsUser manualiPad2