Acoustic Research AWSBT4 Installation And Operation Manual

Also see for AWSBT4: Installation and operation manual Installation and operation manual

Acoustic Research AWSBT4 Installation And Operation Manual Manual pdf 1 page image

Powering the SpeakerThere are two options to power your wireless speaker: using the included AC power adapteror using 8 AA batteries (not included).AC Power AdapterInsert the small, round plug from the speaker AC1.power adapter into the DC IN jack on the bottompanel of the speaker.Plug the other end of the speaker AC power2.adapter into any standard 120V AC wall outlet.Notes: Be sure to use the speaker AC power adapterrated 12V DC 1000 mA.The power unit should be plugged in so that it staysvertical or lies flat.AA BatteriesRemove the battery compartment cover on the bottom of the speaker.1.Insert eight (8) AA batteries (not included) into the speaker following the polarity (”+”2.and “-”) as diagrammed inside the battery compartment.Replace the battery compartment cover on the bottom of the speaker.3.Note: Place the rubber cap in the speaker power input jack when using batteries.DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkalinebattery). DO NOT mix new and used batteries. DO NOT leave batteries installed in the productwhen not in use for long periods. Always remove old, weak or worn-out batteries promptly andrecycle or dispose of them in accordance with local and national regulations.IntroductionThe portable wireless speaker makes it easy to take your music wherever you go and share itwhenever you want, with Bluetooth® wireless connectivity and a built-in auxiliary input. It’scompact, easy-to-carry and simple to use.This manual covers various connection options and detailed operating instructions formaking the customizable portable wireless speaker a part of your lifestyle. If, after havingreviewed the instructions, you have any questions, please call toll-free 1-800-732-6866 orvisit www.acoustic-research.com.Important InformationRISK OF ELECTRIC SHOCK.DO NOT OPEN.CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). Nouser serviceable parts inside. Refer servicing to qualified service personnel.Product InformationKeep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record theserial and model numbers in case you need them. These numbers are located on the product.Model No.: _____________________________________________________________________________________________Purchase Date: _________________________________________________________________________________________Dealer/Address/Phone: __________________________________________________________________________________Important Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Clean only with dry cloth.6. Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.7. Do not install near any heat sources such as radiators,heat registers, stoves, or other apparatus (includingamplifiers) that produce heat.8. Protect the power cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and thepoint where they exit from the apparatus.9. Unplug this apparatus during lightning storms or whenunused for long periods of time.10. Refer all servicing to qualified service personnel.Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord or plugis damaged, liquid has been spilled or objects have falleninto the apparatus, the apparatus has been exposed torain or moisture, does not operate normally, or has beendropped.Care and Maintenance• Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or othersolvents as they may damage the surface.• Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock.• If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm toprevent possible damage.• Do not operate or store the system in extreme temperatures (below 32ºF/0ºC and above 122ºF/50ºC).Tour of the SpeakerPowering the Speaker SystemModel AWSBT4/AWSBT4BKInstallation and Operation ManualPortableWirelessSpeakerSetting Up Bluetooth WirelessPairingThe Bluetooth-enabled device that you wish to stream audio to your speaker system mustfi rst be paired to the speaker. The process is simple, and in most cases the pairing processneeds to be done only once.To pair your Bluetooth-enabled device with the speaker:Make sure your device’s1. Bluetooth is turned on. See the wireless and/or network settingsmenu on your device to check.If the speaker isn’t already on, press the ON/OFF button to turn it on. You will hear the2.turn on music to indicate the speaker is turned on. The indicator light at the back of thespeaker starts flashing blue.Open the3. Bluetooth settings menu on your device. Select “AR AWSBT4” from the list ofdevices available (you might have to scan for devices). If your device asks for a password,enter “0000”.A confirmation screen will appear on your device once the speaker and the device are4.successfully paired. The blue indicator turns solid blue to indicate successful connection.The speaker is now ready for you to stream audio from your device.Turn the volume on your device to at least 3/4 max, then start playing something on the5.device. Control the speaker volume on the speaker itself, using the Volume +/– buttons atthe back of the speaker.Note:• If you notice the sound from the speaker is distorted, turn down your device’s volume.ReconnectingWhen you turn it on, the speaker reconnects automatically with the last paired device. Whenyou leave the Bluetooth operating range, with the speaker turned ON, it disconnects. Whenyou come back into the Bluetooth operating range, press the Pair button to reconnect to thelast paired device. The successfully paired music will sound once it has been successfullyconnected.For PLUGGABLE EQUIPMENT, the socket-outlet shallbe installed near the equipment and shall be easilyaccessible.The apparatus shall not be exposed to dripping orsplashing or placed near objects filled with liquids.Back panelPower and Pairing indicator shows the status ofthe speaker.Blue, slow blinking: The speaker is on but not pairedor connected.Blue, fast blinking: The speaker is in Bluetoothpairing mode. See the Bluetooth Setup section for moreinformation.Solid blue: The speaker is paired with a Bluetooth-enabled device or the auxiliary audio input isconnected.ON/OFF button turns the speaker on and off.- VOLUME + buttons adjust the speaker’s volumelevel.Pair button (Press and hold for 3 seconds)puts the speaker in pairing mode for Bluetooth setup(press and hold for 3 seconds). It also performs a fastreconnect with devices that have lost connection (pressand release). See the Bluetooth setup section for moreinformationAUX IN connects directly to your MP3 player,smartphone, or other portable audio device, using the3.5mm audio in cable provided.DC IN receives the small round end of the included 12VDC 1000mA AC power adapter; remove the protectivecover to insert the adapter.Bottom panelBattery Compartment Cover remove to install 8AA batteries.

/ 2

Related manuals for Acoustic Research AWSBT4