Adaptec M3093GX Installation Procedure

Adaptec M3093GX Installation Procedure Manual pdf 1 page image

M3093GX\DG\M3096G\GX\M3097G+\DGFi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSIWin2000\XP Installation ProcedureRev050304AStep A: Required hardware.To install these models you will need a Narrow SCSI 50-pin controller and six foot (maximum)Narrow SCSI cable.Step B: Removing the shipping bracket.It is recommended that before you connect the scanner to your computer that you inspect thescanner and remove the shipping bracket first.Removing the shipping bracket: The flatbed scanner models typically come with afactory installed shipping lock designed to protect the scanner during shipment. Beforethe scanner can be used the shipping lock must be unlocked. Follow these instructionsto unlock the shipping bracket:1. Slide the scanner to its side as shown in figure below.2. Unscrew the retainer screw and remove the shipping bracket.3. Place the shipping bracket in the “use position” slot and secure it with the retainerscrew (see figure below)4. Place scanner back in its normal position