Addonics Technologies ADM218SA Manual

Addonics Technologies ADM218SA Manual Manual pdf 1 page image

M2 - 1.8" Micro SATA adapterModel: ADM218SAINTRODUCTIONThis M2 - 1.8" Micro SATA adapter is designed to enable M2 SSD, withlength of 30, 42 or 60 mm, to be used as a direct replacement of the1.8" micro SATA hard drive. As a result, any equipment, such asNotebook computer, iPOD that uses a 1.8" SATA hard drive can beeasily converted to use the low power and shock resistant M2 SSD, justlike a SATA solid state drive (SSD). Once installed, the M2 appears asan ordinary SATA hard drive to any OS and can be configured as a bootdevice.This M2 adapter, coupled with the micro SATA - 2.5" HDD adapter, canalso be used like a removable flash media in the Addonics PocketUDD25 or Internal UDD25 reader/writer, allowing easy read/writeaccess to the M2 SSD via USB 3.0 / 2.0 or eSATA connection to anycomputer.M2 SSD installation and overview of the M2 - Micro SATA adapter assembly procedures(Note that the M2 SSD shown in the diagram below is for illustration purpose and is not part of the product) Insert the M2 SSD into the M2 socket at ~ 40° angle as shown in arrow 1. Push down the M2 SSD as shown in arrow 2 and secure the media with the screw providedThe1.8" M2 adapter is designed with the same connector location and dimension as a 1.8" microSATA hard drive. It is a perfect solution for replacing the micro SATA hard drive with the low powerand shock resistant M2 media.

/ 2

Related manuals for Addonics Technologies ADM218SA