Adviva VibraLITE 2 Instruction Manual
Instruction manual VibraLITE 2 / 3The vibration watch is equipped with: Vibration Alarm won't disturb others Beep Alarm option Auto Reload Countdown Timer can be set for seconds, minutes & hours. Use forreminders such as medical conditions, medication, timing presentations or procedures,parking, cooking. Will automatically reload to preset countdown time (VibraLITE 3 only). Electro-Luminescent back light for viewing display at night Second Clock great when travelling in a different time zone Two Alarm Settings use for daily reminders, wake up, snooze, medication Hourly Alert/Chime Option 12 or 24 Hour clock choice StopwatchOPERATING MODES1) Calendar Clock 2) Stopwatch 3) 2nd Clock4) 1st Alarm 5) 2nd Alarm 6) Countdown TimerBEFORE YOU BEGINPress the MODE, START/STOP, LAP/RESET buttons at the same time and hold untildisplay clears. Release buttons.The clock time will be at 12:00 A.M. with the Alarms, Hourly Alert, Beeping and Vibrationfunctions not set. The date will be January 1 and the display will show MO for Monday.FIRST TIME SETTING OF YOUR CALENDAR/CLOCK1. Repeat pressing the MODE button until the CALENDAR CLOCK operating mode shows.2. Press & hold the LAP/RESET button until the seconds digits begin to BLINK. Press theSTART/STOP button to reset the seconds display to 00.3. Press the MODE button. The hour digits will begin to BLINK. Press the START/STOPbutton to rotate to the correct hour of the day.Note: Setting the time in the afternoon or the evening, the PM must show on the display.4. Press the MODE button to go to the minute digits. The minute digits will begin to BLINK.Press the START/STOP button to rotate to the correct minute.5. Press the MODE button and the 12H (12 Hour) mode will BLINK on the display. To selectthe 24 Hour mode press the START/STOP button once. 24H will show on display.6. Press the MODE button for the date. The number 1 will BLINK at the top left corner of thedisplay. Press the START/STOP button to rotate to the correct date of the month. (1 - 31).7. Press the MODE button for the month. The number 1 will BLINK on the display. Press theSTART/STOP button to rotate to the current month of the year (1 - 12).8. Press the MODE button for the Day of the week. MO will BLINK on the display. Press theSTART/STOP button to rotate to the current day.9. Press the LAP/RESET button after the setting. The display will stop blinking.HOW TO SET AN ALARM CLOCK1. Repeat pressing the MODE button to rotate to A1 (1st ALARM) or A2 (2ND ALARM).2. Press & hold the LAP/RESET button until the hour digits BLINK. Press the START/STOPbutton to rotate to the hour wanted.Note: In the 12 Hr Mode, remember to use the PM indicator for correct setting.3. Press the MODE button to go to the minutes. The minutes will BLINK. Press theSTART/STOP button to rotate to the minute wanted.4. Press the LAP/RESET button when finished. The display will stop blinking.Note: The Alarm is not yet activated. Follow the next steps.ON/OFF SETTINGS OF ALARMSNote: To turn on or off First Alarm you must be in the A1 mode. To turn on or off SecondAlarm you must be in the A2 mode.1. Repeat pressing the MODE button to show alarm you wish to turn off or on (A1 or A2).2. Repeat pressing the START/STOP button to rotate, alarm on (hourly alert) & alarm off.When icon(s) shows, alarm is set. Alarm is off when icon does not show. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine