Aegis 8250 Quick Manual
  |
TECHNICAL SUPPORT IS AVAILABLE MON-FRI7:30AM-3:30PM PST AT 1-888-678-7224by Pach & Co. Quick Guide Parts above are onlyincluded on completesystem (8250) Missing Parts, contact Pachand Company 1-888-678-7224 Defective system undermanufacturer warranty,call 1-888-678-7224 foradvance replacement 24 Months warranty forcomplete system 6 Months warranty forPrinted Circuit Board(8PCB250) Manuals, managementsoftware, catalog are on CDor download at www.pach-co.comRed button is Master Code retrieval button. See also diagram.What is Master Code: 4- digit code to log-on to programming mode(0000 is default)What is Dir (directory code): 2, 3, or 4 digit number see functioncode 09. The number can be associated to apartment no., first threedigit of phone no., last four digit of phone no. , or any random no.assigned to each tenants. Every tenant must have different directorycode no..What is Access Code: 4-digit code for tenant to open the door orgate.Exit program, clear field,reset keystroke. 17 Set system dateSave program 19 Initialize event recordingbuffer00 Change master code(0000 is default) 20 Remote unlock relay 1(1-9, 9 is default)01 Add new tenant 21 Remote unlock relay 2(1-9, 8 is default)02 Edit existing tenant 40Master code mask.Warning: read manualfor more detail.03 Delete existing tenant 46 Display system’sinformation04 Clear all tenants 50 Clear memory to factorydefault05Manual unlock/lock relay 1with timer (01-98 hours, 99hours unlock hold, 00hours to lock)70 Select Modem ProtocolV22 or B21206 Manual unlock/lock relay 2 71 Enable Disable Modem07 Single or multi system(single is default) 72 Invalid code lock-outcount (1-9). 3 is default08 System ID number (n/a) 73 Tone/pulse dialing.Tone is default09 Directory digit (2, 3 or 4digit, 3 digit is default) 74Enable/disable autoanswer. Enable isdefault10 Edit scrolling message 75Enable/disable keypadpress beep. Enable isdefault11Relay 1 unlock interval(04-99 seconds, 12seconds is default)76 Enable/disable speakerbeep. Enable is default12 Relay 2 unlock interval 77 Enable/disable PBX.Disable is default14 Set system clock 78 View name anddirectory15 Day light saving 79Talk time (10-180seconds). 60 second isdefault16 Display current time 91Total number of tenant.Tenant with no namewill not be included Log on to programming: Presssimultaneously then release, welcomemessage will stop scrolling (repeat if screenstill scrolls) enter 4-digit “MASTER CODE”(0000 is default), the screen will show:Select the “Function Code” from the tableTwo ways call from the system1. Press to scroll name from A-Z or to scroll name fromZ-A then press to call name selected.2. Press wait for dial tone then press the directory no.Opening the door remotely press to release relay 1(door 1) or to release relay 2 (door 2).Opening the door using the access code press (displayscreen will stop scrolling) then press a valid 4-digit accesscode.Extending talk time tenant must press from the phoneafter the time out warning beep.Calling into the system: incase you are not available whenyour visitor call you. Follow steps below to use this feature1. The system modem must be disabled and function 74 (autoanswer must be enabled).2. Call the system’s phone no., you will hear “ONE BEEP”, thenpress to talk to your visitor. Press or to releasethe door1. Press after selecting a letter or character.2. You have 30 seconds to enter each letter or character.3. Letter QZ, numeric 0-9 and punctuations press4. Press space and for backspace |
manualsdatabase
Your AI-powered manual search engine