Automotive ET3334 Instruction Manual
    |
-01-Automotive Circuit TracerET3334 Circuit Tracer InstructionsFault Finder Transmitter Fault Finder Receiver1. INTRODUCTIONThis auto circuit tracer aids with locating short & open circuits, as well as identifying individualwires in the wiring harness. For use on DC circuits ONLY. Battery powered for easy use in hardto reach areas.2. CAUTION BEFORE OPERATION● Use with DC voltage only.● DC voltage must not exceed 42V.● You must NOT connect with AC voltage.● Do not connect to the ignition circuit / system.● Do not connect with pulse sensitive circuits like air bag, electronic control modules, etc.● Please read the vehicle’s service manual before operation.● Please switch on the transmitter before connecting to any circuit.3. SPECIFICATIONSSpecificationsAmbient operating range 0°C to 40°C (32°F to 104°F)Relative humidity 10-95% RH noncondensing, @ up to 30°C (86°F)Storage temperature -20°C to 60°C ,≤ 85%RH, without batteryPower supply 9V BatteryWeight / Dimensions (Body)(Not including battery)Transmitter 135g, 150*68*27mmReceiver 140g, 150*68*27mm |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine