M1. Loosen the screws of Support Beam (G) using the 4mm Allen Wrench.2. Extend Support Beam (G) and place over 1 x Side Leg (A) and Middle Leg (B).Fix both legs into place using 8 x (W) Screws.a. On the left side ofSupport Beam 1 (G),attach Middle Leg(B) using 4 (W).c. Assembleright side ofSupport Beam 1with Side Leg(A) using 4 (W)b. Makesure thebar facesoutward.3. Loosen the screws of Support Beam (H) using the 4mm Allen Wrench.L-Shaped SmartDeskASSEMBLY INSTRUCTIONS

Autonomous L-Shaped SmartDesk Assembly Instructions Manual