AB-64841Specifications/InstructionsConverterGeneralModel RYY792X series of converters offer compact,space-saving, easy installation with its plug-in structure.Each model is modularized for a particular function. ModelRYY792X converters can be used for signal transmissionbetween instruments, as a controller, for monitoring, and forvarious other applications.Features Compact, space-saving, plug-in structure. Minimal mounting space. Wide variety of converter types.SpecificationsItems SpecificationsPower 85 V AC to 264 V AC, 50 Hz / 60 HzInsulationresistance100 M or over at 500 V DC(Between input/output and power supply)Withstand voltage 2000 V AC for one minute(Between input/output and power supply)Rated operatingconditionsTemperature:Humidity:Altitude:Vibration:-5 C to 55 C5 %RH to 90 %RH(Non-condensing)2,000m or lower4.9 m/s², 5 Hz to 100 HzAmbient storage &transportationconditionsTemperature:Humidity:Vibration:-10 C to 60 C5 %RH to 90 %RH(Non-condensing)9.8 m/s², 0 Hz to 60 HzProductspecifications Refer to Product Specifications.Dimensions Refer to Figs. 1 and 2.Accessory Socket (See Fig. 2.)Auxiliary partSocket: Part No. RYY-CS3700-11P(Though the socket is supplied with ModelRYY792X, the socket can separately beordered as an auxiliary part.)CE Marking ConformityThis product must be installed in a panel cabinet. Besides,the product in the panel cabinet must be out of reach ofunauthorized people who are not well-trained for electricfacilities.This product complies with the following ElectromagneticCompatibility (EMC) and the Low Voltage Directive (LVD).EMC: EN61326-1 Class A, Table 2 (For use in an industrialelectromagnetic environment)LVD: EN61010-1 Overvoltage category IIPollution degree 2DimensionsFigure 1. Dimensions (mm): With the socket assembledFigure 2. Dimensions (mm): Socket in frontPotentiometer knob for SPAN adjustmentPotentiometer knob for ZERO adjustmentMain unit fixing screw25 8 84 336 18.4 35.2848684Main unit Socket30.5 40.54.27.59.529Slit for wall mounting(with M4 screw)4.2Slit for wall mounting(with M4 screw)Input/output terminals