Aztech WL557RT4 Easy Start Manual

Also see for WL557RT4: User manual Speci?cations Instruction guide

Aztech WL557RT4 Easy Start Manual Manual pdf 1 page image

WL557RT4 Device Overview Setup Diagram Using ADSL/Cable ModemConnecting to the Internet Using ADSL/Cable ModemThis guide will help you set the wireless router for Internet connection and wireless networking. Before you continue, pleaseensure that the Internet connection is working on your ADSL/Cable Modem.Press the button for 5 seconds and then release it.System restores the factory default settings.Power buttonPower socket, for connecting the power adapter.WAN interface, for connecting WAN or the uplinknetwork devices.LAN interface, for connecting hub, switch, orcomputer on LAN.WPS: If WPS is enabled, press this button for 1second, and then the wireless router starts toaccept the negotiation of PBC mode.Step1- Connect one end of the power adapter tothe power interface on the wirelessrouter, and connect the other end to thepower socket on the wall.Step2- Connect the ADSL/Cable Modem to theWAN interface on the wireless router.Step3- Connect your PC to the LAN interface onthe wireless router.Note:You can connect to the router wirelesslyby using the wireless configuration tool onthe wireless client. Please ensure that yourModem’s LAN IP address does not conflictthe router’s IP addressTo connect to the Internet via the Web user interface, do as follows:1. Open your Internet web browser.2. Enter http://192.168.2.1 in the address bar and press the Enter key.3. Enter the username and the password on the login page. The default username and password isadmin/admin.4. Click the Wizard tab, and then follow the step-by-step guide to set the wireless router.5. Click Yes to continue.6. Set the login password and then click Next to continue. The default password is admin.7. Select the proper time zone and then click Next to continue.8. Select the proper operation mode, and then click Next to continue. The default operation mode is Gateway.9. Select the DHCP WAN connection type and then click Next to continue. The wireless router will automaticallyacquire the IP address, subnet mask, gateway and so on.10.After setting the WAN connection type, click Next to complete the Wizard configuration.11. Click Connect to save and reboot the wireless router.NotebookConnect to your couter via wireless using your wireless software utilityPDA Phones/Wifi PhonesDesktop PCINTERNETLAN PortADSL/Cable modemWAN PortPower AdapterSTEP 2STEP 3STEP 1

/ 2

Related manuals for Aztech WL557RT4