Aztech WL559E Faq

Also see for WL559E: Easy start guide User manual User manual User manual

Aztech WL559E Faq Manual pdf 1 page image

WL559E FAQAZTECHFrequently Ask Questions1. Why can’t I access the Web UI of my WL559E?Ans:Ensure that the Ethernet cable is connected to WL559E’s Ethernet portthrough the computer’s Ethernet port via the Ethernet cable and that thedevice is switch on.Ans:You may turn-off / disable your wireless network on your computer andlaunch a Web browser it should redirect you to User Interface of theWL559E (If in any case it does not type http://10.0.10.254 on your Webbrowser Ex: Internet Explorer, Firefox, or Chrome etc.)2. What if I want to change some configuration on my WL559E after it has beenpreviously configured and connected to my wireless AP/Router?Ans:If you are connected to the WL559E’s wireless network, you may just openyour Web browser and type http://10.0.10.254 to get to the Web userinterface; since there is no way that we can find out if we are connected tothe WL559E’s wireless network as they advertise the same wirelessnetwork(SSID).Ans:Another way is to connect an Ethernet cable between WL559Eyou’re yourcomputer then access the Web user Interface by typing http://10.0.10.254via the Web Browser.3. Will the WL559E increase the range and throughput of my wireless AP/Router?Ans:The WL559E will extend the range of your wireless AP/router but it willNOT increase the throughput due to the fact that all repeaters will sacrificehalf of the bandwidth available from the primary router for clientswirelessly connected to the repeater. This is a result of the repeater takingturns talking to not just one partner, but to two, and having to relay thetraffic between them.

/ 2

Related manuals for Aztech WL559E