BAPI BAPI-Stat Quantum Installation & Operations

BAPI BAPI-Stat Quantum Installation & Operations Manual pdf 1 page image

BAPI-Stat “Quantum” Wireless Room Temperatureor Temperature/Humidity SensorBuilding Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USATel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:sales@bapihvac.com • Web:www.bapihvac.com1 of 4Installation & O perations49875_Wireless_BLE_Quantum_Temp_Hum rev. 12/08/23Adjustable SettingsBAPI’s wireless devices have several settings that can be can be field adjusted to suit the needs of the installation. Allsettings are configured by either BAPI’s cloud based Wireless Asset Monitoring (WAM) or the receiver. (See the WAMor receiver instructions documents available on the BAPI website for more information on adjusting the settings.)Sample Rate/Interval – The time between when the sensor wakes up and takes a reading. The available valuesare 10 sec, 30 sec, 1 min, 3 min or 5 min with the gateway, or 30 sec, 1 min, 3 min or 5 min with the receiver.Transmit Rate/Interval – The time between when the sensor transmits the readings to the gateway or receiver.The available values are 30 sec, 1, 2, 3, 4, 5, 10, 15, 20 or 30 minutes, or 1, 6 or 12 hours with the gateway, or 1, 5, 10or 30 minutes with the receiver.Delta Temperature – The change in temperature between a sample and the last transmission that will cause thesensor to override the transmit interval and immediately transmit the changed temperature. The available values are0.1, 0.2, 0.3, 0.4, 0.5, 1, 2, 3, 4, 5 °F or °C with the gateway, and 1 or 3 °F or °C with the receiver.Delta Humidity – The change humidity between a sample and the last transmission that will cause the sensor tooverride the transmit interval and immediately transmit the changed humidity. The available values are 0.5, 1, 2, 3, 4 or5 %RH with the gateway, and 3 or 5 %RH with the receiver.Temperature Min/Max – The maximum or minumum temperature that will cause the sensor to override thetransmit interval and immediately transmit a reading to the gateway. (Only available when using a gateway.)Temperature Offset – Adjusts the temperature value being transmitted to match that of a calibrated referencedevice. The available values are ±0.1, 0.2, 0.5, 1, 2, 3, 4 or 5 °F or °C. (Only available when using a gateway.)Humidity Offset – Adjusts the humidity value being transmitted to match that of a calibrated reference device. Theavailable values are ±0.5, 1, 2, 3 or 5 %RH. (Only available when using a gateway.)Associated Receiver or GatewayPlease see BAPI’s Wireless Quick Start Guide, or the gateway or receiverinstructions available on the BAPI website (www.bapihvac.com/gateway-quick-start)to establish communication between the sensors and the gateway or receiver.GATEWAYThe wireless gateway receives the data from one or more wireless sensors. The gateway thenprovides the data to the cloud via MQTT. The gateway also sends a confirmation signal to eachsensor upon a successful reception of data. The gateway supports up to 32 sensors.WirelessGatewayRECEIVER (Wireless-to-Analog)The wireless receiver from BAPI receives the data fromone or more wireless sensors. The data is then transferredto the analog output modules and converted to an analogvoltage or resistance. The receiver supports up to 32sensors and up to 127 different analog output modules.Wireless Receiver withAnalog Output ModulesOverview and Identification● Optional temperature setpoint and occupant override● User adjustable settings via receiver or WAM● Onboard memory to store readings whencommunication is interrupted● Transmits to a digital Gateway or awireless-to-analog ReceiverThe BAPI-Stat “Quantum” Wireless Sensor measuresthe room temperature or temperature/humidity andtransmits the data via Bluetooth Low Energy to areceiver or gateway. It is available with optionaltemperature setpoint and occupancy override.Sensorswith optionalSetpoint &Override(Right imageshown withoptional 60mmmountingbase)

/ 4

Related manuals for BAPI BAPI-Stat Quantum