BARIONET100Quick Install GuideVersion 2.0IP Automation Controller with Modbus / TCP and SNMP SupportPackage contentsa Barionet 100b 3wire bus cableMounting, Wiring and SetupSlide the device upwards onto the DIN rail. Push it up and towards the railuntil it snaps onto the upper rail edge. For wiring information please referto the second page. Before powering the device please read the usermanual available on www.barix.com.FirmwareThis device comes preloaded with standard firmware.Alternative firmware can be downloaded from www.barix.com.SupportFor support please contact your local dealer or visit www.barix.com.© Barix AG 3/2013, all rights reserved. All information is subject to change without notice. All mentioned trademarks belongto their respective owners and are used for reference only. Barix, Exstreamer and SonicIP are trademarks of Barix AG, Switzerland,and are registered in certain countries.

BARIX BARIONET 100 Quick Install Manual