BASF Goliath Gel BAIT GUN 345 Quick Start Manual
  |
BAIT GUN 345The design of this applicator utilises negative air pressure to pull bait through thebait gun to ensure control of each bait placement. The sturdy features of this welldesigned and ergonomic tool make the Goliath ® Gel Bait Gun 345 convenient andeasy to use.Key1. Clear application tip2. Piston3. Cartridge4. Hooks5. Handel6. Settings7. Selection button8. Push Stick9. Threaded nozzelTo Begin An Application1. Insert the clear appliation tip [1], into the threaded nozzel [9] by turningclockwise until finger tight.2. Adjust the selection button [7] to setting to 1 at the base of the applicatorhandle. This step is important to prime the applicator.3. Insert the cartridge [3] into the cartridge chamber by gently pressing forwardand down until the base of the flange end of the cartridge is seated in thehooks [4].NOTE: During the initial loading process, the cartridge will engage the pumpingmechanism of the piston. This may result in the product being pushed into the applicationtip.*If the cartridge is inserted into the chamber with force, the bait may be pushed through theapplication tip which could result in the loss of a minimal amount of product.*To avoid discharge of product, insert the orange reservior cap onto the threaded nozzel [9] whileyou change reservoirs.[Type a quote from the document orthe summary of an interesting point. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine