1. INTRODUCTIONThe BA3101 and BA3102 are IECEx, ATEX and UKEXcertified intrinsically safe Operator Displays. They are thecore of the Pageant Operator Display System comprisinga 7 inch backlit display with 8 touch buttons, plus 8 socketswhich can accommodate a single CPU module and up to 7input and output modules.BA3101 and BA3102 Operator Displays are mechanicallyand electrically identical, except for their display windowsand certification. The BA3101 has a stainless steel frontpanel surrounding a toughened glass display window.The BA3102 has a stainless steel front panel surroundingan impact resistant polycarbonate window with a scratchresistant exterior hard coating. The BA3102 certificationallows the Operator Display to be installed in an Ex e or Ex tenclosure without invalidating the enclosure’s certification.Both models have third party certified !P66 front panelingress protection.Operator Displays and all of the plug-in modules haveindividual intrinsic safety apparatus certificates. Compatibleinput and output safety parameters allow any certifiedBEKA plug-in Pageant CPU module to be fitted in displaysocket ‘C’. Similarly, any certified BEKA plug-in Pageantinput or output module may be fitted into sockets 1 to 7,providing the sum of the percentage power consumption ofall the modules fitted does not exceed 100%. See PageantSystem Operator Panel instructions for further details.Apart from an earth stud, all field connections to thePageant Operator Displays are made via removableterminals on the plug-in modules.Operator DisplaySockets for up to7 plug-in Input andOutput ModulesPanel mountingclamps 8 offSocket for plug-inCPU Module 'C' socketCertificationinformationlabelM4 earthstud1 2 3 4 5 6 7 CFig 1 Rear view of BA3101 or BA3102without plug-in modulesInstructions forBA3101 and BA3102Pageant Operator DisplaysIssue 58th May 2024BEKA associates Ltd. Old Charlton Rd, Hitchin, Hertfordshire,SG5 2DA, UK Tel: +44(0)1462 438301 e-mail: sales@beka.co.ukweb: www.beka.co.ukPageant Operator Displays are CE marked to show compliance with the European Explosive AtmospheresDirective 2014/34/EU and the European EMC Directive 2014/30/EU.Operator Displays are also UKCA marked to show compliance with UK statutory requirementsEquipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres RegulationsUKSI 2016:1107 (as amended) and with the Electromagnetic Compatibility Regulations UKSI 2016:1091.