Page 1www.babylock.comInstalling Pro-Stitcher ® SoftwareDOWNLOADING THE UPDATEDPRO-STITCHER SOFTWAREBegin by downloading the updatedsoftware from the Baby Lock website.1. Insert a USB drive into the USB portof a computer connected to theInternet. Do not connect your Pro-Stitcher tablet to the internet.2. In a browser window, navigate tothe software section of the BabyLock website: www.babylock.com.ChooseDownload/Software, thenthe approiate update for yourtablet.3. SelectDownload to download themost recent version compatiblewith your tablet. The file will besaved to the Downloads folder onyour computer.4. Locate thePSUpdate[Version#]folder. Copy thePSUpdate.[Version#].exe file from the folderto the USB drive.5. After the file is copied to the USBdrive, safely remove the USB drivefrom the computer and insert it intothe USB port on the Pro-Stitchertablet or tablet bracket, dependingon your tablet model.UPDATING THE PRO-STITCHERTABLET COMPUTER1. Exit the Pro-Stitcher software byselectingShut Down, thenExit toWindows.2. Touch the gray bar at the top-leftcorner of the screen to open theon-screen keyboard.3. Press theWindows key on thekeyboard (it turns white). Thenpress the letterE to open a FileExplorer window.4. Locate the USB drive in File Explorer.Press and hold the file name,PSUpdate.[Version#].exe, until a boxappears around your finger; thenrelease your finger. (This simulatesa right-click.) Then select Run asAdministrator from the drop-downmenu.5. SelectStart when this screenappears.CAUTION: Before installing anyPro-Stitcher software, ensure yourtablet is compatible. Importanttablet compatibility information canbe found at www.babylock.com.TOOLS REQUIRED:• USB drive NOTE: The USB port is in the blackbox behind the tablet, or on thetablet bracket. NOTE: Confirm that you are at themost current version update foryour model tablet.Installed Version: [Version#]Restore Version: [Version#]Apr2017www.babylock.comUser Reference Guide