3015-5744 Rev 1 1Battery Replacement Kitfor Portable Area Gas Monitors (PAGMs)Instruction Manual1. ScopeThis instruction manual describes how to replace the battery in your PAGM infrared gas leak detector. It is assumed thatthe user is familiar with the device. If necessary, refer to the instructions for detailed operation and maintenanceinformation for each PAGM model.WARNING: Failure to comply with these instructions may void the warranty.2. Items Required• Original PAGM instruction manual (optional)• Replacement Battery Kit (3015-5743)o Rechargeable lithium-ion battery (colors may vary)o Cable with 2.1 mm jack (for newer series PAGMs)o Cable with 2.5 mm jack (marked in red, for older series PAGMs)o Battery chargero This instruction manualNOTE: The 2.1 mm and 2.5 mm cables look very similar. For easy identification, the cable with the 2.5 mmplug is marked in red. Note that this cable is used for certain older series PAGMs.www. .com information@itm.com1.800.561.8187