Bachmann E-Z Command Plus Setup And Programming Instructions
        |
Bachmann Trains is pleased to bring you E-Z Command® Plus. With E-Z Command®, digital control of speed, lighting, sound, anddirection of multiple locomotives is possible, as well as remote control of Bachmann’s E-Z Command® DCC-equipped turnouts.E-Z Command® simplifies the programming process for locomotives with one-button, on-track programming. Other features include128-speed steps for smooth operation and plug-in wiring for simple setup. E-Z Command® will operate all DCC-equipped Bachmannlocomotives as well as NMRA compliant DCC-equipped locomotives from many other manufacturers.Your E-Z Command® Plus Digital Command Control System consists of the following components:• E-Z Command® Plus Control Center• 1 Red E-Z Track® Track Power Wire• Wall-pack Power SupplyWith plug-and-play capability, E-Z Command® is simple to set up and use, whether you’re operating an existing model railroad or buildingan entirely new layout. To ensure trouble-free operation, we recommend that you read this manual completely before using your system forthe first time.Important NoticeDo not connect the E-Z Command® Plus Control Center to the wall-pack power supply until you have connected the control center toyour track. Multiple dial turns required to bring locomotive up to speed.Setup and Programming InstructionsCAUTION-ELECTRICALLY OPERATED PRODUCTNOT RECOMMENDED FOR CHILDREN UNDER 14 YEARS OF AGE. AS WITH ALLELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USETO PREVENT ELECTRIC SHOCK. INPUT: 120 VAC 60Hz 22W. OUTPUT: DC 16V 1000mA 16VA1 |
Related manuals for Bachmann E-Z Command Plus
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine