Backyard Creations Wrought Iron M21037T Assembly Instructions Manual

Backyard Creations Wrought Iron M21037T Assembly Instructions Manual Manual pdf 1 page image

Step 2: Lay Table Top Frame (A) upside down on ground, so bottom is facing up.Step 3: Attach each of four legs (B) to the bottom as shown in Diagram 1, using Short Bolt (D)and Washer (G). Then attach Stretcher (C) to Legs(B) using Long Bolt (E) and Washer (G) ,and Nut (F) as shown in Diagram 2.Step 4: Make sure all bolts are aligned properly and tightened sufficiently. Then place BoltCovers(H) and Nut Covers(I) over bolts and nuts. Then turn the table over to upright positiononto flat surface.NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED ANDTIGHTENED PROPERLY AND SECURELY.WARNING!: WARNING!: TABLE IS NOT MEANT FOR SITTING OR STANDING ON. DO NOTSIT/STAND ON OR LEAN FULL BODY AGAINST TABLE. IMPROPER USE MAY LEAD TOPRODUCT DAMAGE AND/OR BODILY INJURY.Wrought Iron 42" Rd Mesh Dining TableItem #2720469 / M21037TAssembly Instructions**TO AVOID POTENTIAL SCRATCHING TO PARTS BY ROUGH GROUND SURFACE, COVER GROUNDWITH SOFT SMOOTH PROTECTIVE MATERIAL ON WHICH TO PLACE PARTS DURING ASSEMBLY. **Diagram 1Step 1: Remove protective wrapping and lay all parts on ground. Identify all parts packed incarton against the parts list.HGDHGDAB1 of 2

/ 2

Related manuals for Backyard Creations 2720469