Backyard Discovery Next Generation 5007 Assembly Manual

Backyard Discovery Next Generation 5007 Assembly Manual Manual pdf 1 page image

The Cedar Mountain SwingsetFrom Backyard DiscoveryBackyard Discovery3001 N Rouse AvePittsburg, KS 66762www.swingsetsonline.comSales: 855-308-6871Support: 800-856-4445YOU MUST START HERE!Use these assembly instructions to begin assembly of your Cedar Mountain swingset.1. The Cedar Mountain is made from individually packaged components. Eachcomponent has its own assembly instructions in the box.2. Build each component according to the instructions in the respectivecomponent box(es) except for the Tunnel.3. For the tunnel only, you MUST use the instructions in this package. DO NOT USETHE INSTRUCTIONS IN THE TUNNEL/ ROCK WALL BOX!4. Once all components are complete, attach them to the respective towers tomake the Cedar Mountain configuration as shown. Attach the towers togetherusing the tunnel and the instructions in this package!5. The swing beam can be attached to the back of either fort without causing aplay conflict.6. Build the rock wall using the original tunnel/rock wall instructions in the box andattach it to one of the fort openings as directed in the rock wall instructions.7. DO NOT INSTALL THE 10’ SLIDE AND THE 8’ SLIDE NEXT TO EACH OTHER! YOUMUST LEAVE A TOWER WALL PANEL IN PLACE AS A SPACER TO SEPARATE THETWO SLIDES. MOUNTING THEM CLOSE WILL CAUSE A PLAY CONFLICT ANDMAY RESULT IN INJURY!8. DO NOT MOUNT THE MONKEY BARS ON THE SAME TOWER/SIDE OF THETOWER AS EITHER SLIDE. THIS WILL CAUSE A PLAY CONFLICT AND MAY RESULTIN INJURY!Meijer.com